Need help?Do you have a question about the Yamaha F60F and is the answer not in the manual?
General| Displacement | 996 cc |
|---|---|
| Max Output | 60 hp |
| Prop Shaft Horsepower | 60 hp |
| Full Throttle RPM Range | 5000 - 6000 rpm |
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Recommended Fuel | Regular Unleaded (Minimum Pump Octane 87) |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Gear Shift | F-N-R |
| Exhaust | Through Propeller |
| Steering | Remote |
| Trim & Tilt | Power Trim & Tilt |
| CARB Rating | 3-Star |
| Engine Type | 4-stroke, SOHC |
| Bore x Stroke | 65 mm x 75 mm |
| Recommended Oil | Yamalube 4M |
| Ignition System | TCI |
| Shaft Length | 20 in |
| Warranty | 3 years limited warranty |
Covers propeller, rotating parts, hot parts, electric shock, trim/tilt, and shut-off cord hazards.
Covers overloading, collision avoidance, and procedures for object impacts.
Covers installation, horsepower, mounting, remote controls, battery, and propeller selection.
Covers fuel requirements, gasoline safety, and contamination warnings.
Operation of the engine shut-off cord (lanyard) and stop button.
Covers oil pressure, overheat alerts, and digital tachometer operation.
Explains Y-COP, water separator, engine trouble, battery, overheat, and oil alerts.
General system alerts and details on the overheat alert system.
Details on the low oil pressure alert system and its behavior.
Covers overpowering, improper mounting hazards, and optimal mounting height.
First-time use, engine oil filling, and engine break-in procedures.
Procedures for checking fuel system integrity and safety warnings.
Detailed steps for safely refueling the boat.
Safety for starting, gasoline vapor, CO hazards, and portable tank fueling.
Safety precautions for starting and specific model starting procedures.
Verifying cooling water flow from the pilot hole after engine start.
Steps to safely shut down the engine.
Safety warnings and precautions for shallow water use.
Procedures for checking idle speed and changing engine oil.
Table detailing periodic maintenance tasks and recommended intervals.
Continuation of the periodic maintenance schedule.
Additional periodic maintenance schedule items.
Procedures for changing gear oil and servicing sacrificial anodes.
Checking battery, connecting, disconnecting, and storing procedures.
Procedure for replacing the engine oil filter.
Q&A for common starting, idling, and engine issues.
To Next Page
