Operation
54
(2) Move the remote control lever / gear
shift lever firmly and crisply forward (for
forward gear) or backward (for reverse
gear) [about 35 (a detent can felt) for re-
mote control models]. Be sure to check
that the tilt lock lever is in the lock/down
position (if equipped) before operating in
reverse.
To shift from in gear (forward/reverse) to
neutral
(1) Close the throttle so that the engine
slows to idle speed.
(2) After the engine is at idle speed in gear
move the remote control lever / gear
shift lever firmly and crisply into the neu-
tral position.
1. Neutral interlock trigger
6C1-9-7J-1E0.book 54 ページ ２０１９年１０月３０日 水曜日 午後２時５６分
To Next Page
Loading...
