Yamaha F70 FourStrake - F70 Features and Compatibility; Model Code Chart and Dimensions; Rigging Options Compatibility; Key Switches and Lanyards

F250 SPECIFICATIONS
FEATURES
F70 Four Stroke
RIGGING OPTIONS
KEY SWITCHES AND LANYARDS
• Command Link Compatible
• Conventional Compatible
• Command Link Plus Not Compatible
MISCELLANEOUS
• Command Link Gateway Compatible
• Analog Gauge Interface Compatible
• Command Link Triducer® Compatible
• Y-COP™ (Immobilizer) Compatible
• Variable Trolling RPM Compatible
Consult appropriate Yamaha rigging information and Yamaha Rigging Sheet (YMBS) for complete rigging compatibility and requirements
information for particular confi gurations. All rigging items sold separately.
GAUGES
• Command Link® Compatible
• Yamaha Multifunction Compatible
• Analog Compatible
• External NMEA-2000® Display Compatible
• Command Link Plus Not Compatible
CONTROLS
• Mechanical (Cable) Compatible
• Multifunction Tiller Handle Compatible
• Command Link Plus Digital Not Compatible
Electronic Controls
• Command Link Digital Not Compatible
Electronic Controls
F 70 L A
Fuel Induction Horsepower Shaft Starting Method Control Generation
Length PTT Method
F = Four Stroke S = 15" Blank = PTT & E start Blank = Remote A = 1st change on motor
L = 20” P = PT & E start
Control
B = 2nd change on motor
X = 25” E = Electric Start
H = Tiller Handle
C = 3rd change on motor
U = 30” M = Manual Start
C = Command Link
Etc.
J = Jet
Control
MODEL CODE CHART
DIMENSIONS
Overall length . . . A 713 mm (28.1 inches)
Overall width . . . B 386 mm (15.2 inches)
Overall height . . . C 1476 mm (58.1 inches)
Engine transom height . . . D 534 mm (21 inches)
Steering angle . . . E 40 deg. each direction
Reviewed and/or revised 7/1/10