EasyManua.ls Logo

Yamaha F75C - User Manual

Yamaha F75C
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Printed in Japan
April 2003-0.2 × 1 !
67F-28199-17
(F75AET, F90AET)
(E)
Printed on recycled paper
F75C
F90C
OWNER’S MANUAL
U.S.A.Edition
LIT-18626-05-36
67F-17 Hyoshi 3/19/03 17:20 Page 1

Table of Contents

Questions and Answers

  • A
    amandaariasAug 21, 2025
    How to fix a Yamaha F75C Outboard Motor when the starter will not operate?
    • H
      Heather ReeseAug 21, 2025
      If the starter on your Yamaha Outboard Motor isn't working, begin by checking the battery. It might be weak or have low capacity, so verify its condition and use a battery with the recommended capacity. Ensure the battery connections are tight and free from corrosion; tighten the cables and clean the terminals if necessary. Inspect the fuse for the electric start circuit; if it's blown, identify the cause of the overload, repair it, and replace the fuse with one of the correct amperage. Also, make sure the shift lever is in neutral. If these steps don't resolve the issue, the starter components may be faulty, requiring service by a Yamaha dealer.
  • T
    Tami BlanchardNov 11, 2025
    Why won't my Yamaha Outboard Motor start even though the starter is working?
    • J
      Jennifer MclaughlinNov 11, 2025
      If your Yamaha Outboard Motor's starter operates but the engine doesn't start, several factors could be the cause. The fuel tank might be empty, or the fuel could be contaminated or stale; in these cases, fill the tank with clean, fresh fuel. The fuel filter could be clogged, so you should clean or replace it. Make sure the engine stop switch lanyard is attached. Inspect the spark plugs; they may be fouled or of an incorrect type, requiring cleaning or replacement with the recommended type. Also, check the spark plug caps to ensure they are correctly fitted. There might be poor connections or damaged ignition wiring, so check the wires for wear or breaks, tighten any loose connections, and replace worn or broken wires. If none of these steps work, the fuel pump or ignition parts may be fau...
  • W
    woodmichelleDec 1, 2025
    What to do if my Yamaha F75C engine idles irregularly or stalls?
    • S
      Shannon ParkerDec 1, 2025
      If your Yamaha Outboard Motor engine idles irregularly or stalls, there are several potential causes. First, inspect the spark plugs; they may be fouled or of the incorrect type, so clean or replace them with the recommended type. Check for any obstructions in the fuel system, such as a pinched or kinked fuel line. Ensure that you are using specified engine oil, and replace it if needed. The fuel may be contaminated or stale, so fill the tank with clean, fresh fuel. Also, the fuel filter might be clogged, so clean or replace it. Inspect and adjust the spark plug gap as specified. Check the wires for wear or breaks, tighten all loose connections, and replace worn or broken wires. Ensure the air vent screw on the fuel tank is open, and the choke knob is in home position. Return the motor to ...

Yamaha F75C Specifications

General IconGeneral
Starting SystemElectric
SteeringRemote
Gear ShiftF-N-R
ExhaustThrough Propeller
Max Output75 hp at 5, 500 rpm
Fuel Induction SystemEFI (Electronic Fuel Injection)
Full Throttle RPM Range5000 - 6000 rpm
Shaft Length20 inches
Engine Type4-stroke, SOHC, 4-valve

Related product manuals