What to do if Yamaha F9.9FE Outboard Motor fuel management gauge shows incorrect fuel consumption?
If the fuel management gauge shows incorrect fuel consumption, the engine recognition might be wrong (especially for multi-applications). To fix this, default the engine number and turn the key switch on in order from the portside engine to re-memorize each engine number.
What to do if the Yamaha F9.9FE gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha F9.9FE illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha F9.9FE Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha F9.9FE fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
What to do if Yamaha F9.9FE Outboard Motor gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
Why Yamaha F9.9FE Outboard Motor Speedometer or Comb. Speedometer & Fuel mgt gauge shows incorrect fuel level?
If the speedometer or combination speedometer & fuel management gauge shows an incorrect fuel level, the fuel sensor selection is likely wrong. Set up the fuel sensor to the correct resistance.
How to fix Yamaha Outboard Motor trim gauge showing incorrect position?
If the trim gauge shows an incorrect position, the initial position setting might be wrong, or the trim sender could be damaged. Put the motor in the fully trimmed-in position and reset the initial (zero) trim angle. If that doesn't work, replace the trim sender.
Why Yamaha F9.9FE gauge operates unstably?
If the gauge operates unstably, it could be because a resistor is not connected to the ending hubs. Connect the gray 6-pin cap to the ending multi-hubs.
What causes Yamaha Outboard Motor gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
General| Brand | Yamaha |
|---|---|
| Model | F9.9FE |
| Category | Outboard Motor |
| Language | English |
Step-by-step instructions for safely removing the outboard motor from its steel frame.
Guidelines for correctly positioning and mounting the outboard motor onto the boat transom.
Instructions for setting twin motors in the toe-out position for optimal wake performance.
Instructions for installing the remote oil tank for 2-stroke V4 and V6 oil injection engines.
Guidance on selecting the appropriate propeller based on engine and application needs.
Overview of Yamaha's throttle control systems and applications for various remote control models.
Describes the features and electrical functions of the multi-function tiller handle for various engine models.
Step-by-step guide for installing and mounting gauges, including angle and clearance requirements.
Information on analog tachometers, essential for monitoring engine speed and ensuring efficient operation.
Details on digital tachometers, including elapsed hour, trim, and oil warning indicator functions.
Explains how the speedometer measures boat speed using water impact force and lists applications.
Describes the functions of the fuel management gauge, including fuel flow, consumption, economy, and warnings.
Comprehensive table detailing wire colors, Yamaha standard, ABYC standard, and main usage for electric wires.
Wiring diagram for a single-motor digital meter setup on a 250G engine, including fuel, speed, and tachometer connections.
Wiring diagram for single-motor digital meters with side-mount remote control for 115-300 HP engines.
Wiring diagram for single-motor digital meters with binnacle remote control for 115-300 HP engines.
Wiring diagram for twin-motor digital meters with binnacle remote control for L/250G engines.
Wiring diagram for twin-motor digital meters with binnacle remote control for 115-300 HP engines.
Wiring diagram for analog meters used with 2-stroke engines, including L/250G and premixed models.
Wiring diagram for analog meters used with 2- and 4-stroke engines, covering various models and oil injection types.
Wiring diagrams for analog tachometers with 4-stroke engines, showing connections via EXT wire harness and adapters.
Wiring diagrams for digital tachometers with 4-stroke engines, detailing connections through wire harnesses and adapters.
Wiring diagrams for digital tachometers with 2-stroke HPDI and carbureted engines, including adapter connections.
Lists engine models compatible with digital network gauges, including electronic fuel injected and HPDI engines.
Describes the application of square style digital gauges with large display and dot matrix design.
Wiring diagrams for various engine types (Mechanical RC, HPDI) and configurations (Single, Twin, Triple) using digital network gauges.
Instructions for initial setup of digital network gauges, especially for multi-engine installations.
Table detailing common system or gauge issues, their causes, measures, and notes for troubleshooting.
Guidance on selecting the correct battery capacity and type, emphasizing compatibility with Yamaha's charging system.
Instructions for battery wiring, including isolator-equipped models and twin-battery setups.
A comprehensive checklist for pre-delivery inspection to ensure customer satisfaction and proper operation.
To Next Page