2-6
E
EJU18590
Front seat
To remove the front seat:
1. Remove the rear seat.
2. Pull the front seat latch 1 up, and then
pull the seat off.
To install the front seat:
1. Insert the projections on the front of the
seat into the stays on the deck, and then
push the rear of the seat down to lock it
in place.
2. Install the rear seat.
N
TE:
@
Make sure that the seats are properly
secured before operating the watercraft.
@
UF1S11.book Page 6 Monday, August 2, 2004 3:06 PM
To Next Page
Loading...
