2-20
E
N
TE:
@
●
If neither the start switch nor the remote
control transmitter is operated within
25 seconds after the unlock button is
pressed to select the unlock mode, the
multifunction meter display and the
“L-MODE” indicator light will go off. To
change the modes again, press the lock
button briefly to select the lock mode, and
then press the unlock button again for
less than 4 seconds to select the unlock
mode.
●
While the engine is running, input from
the remote control transmitter is not
received.
@
@
If the remote control transmitter does not
operate when its buttons are pressed,
the battery may be low. Have a Yamaha
dealer replace the battery.
@
UF1S11.book Page 20 Monday, August 2, 2004 3:06 PM
To Next Page
Loading...
