Do you have a question about the Yamaha FZ8-N and is the answer not in the manual?
Bore x Stroke | 68.0 mm x 53.6 mm |
---|---|
Compression Ratio | 12.0:1 |
Fuel System | Fuel Injection |
Transmission | 6-speed |
Final Drive | Chain |
Front Suspension | Telescopic fork |
Front Tire | 120/70 ZR17 |
Rear Tire | 180/55 ZR17 |
Seat Height | 815 mm |
Curb Weight | 211 kg |
Torque | 82.0 Nm @ 8, 000 rpm |
Length | 2, 140 mm |
Width | 770 mm |
Height | 1, 065 mm |
Wheelbase | 1, 460 mm |
Ground Clearance | 140 mm |
Engine Type | 779cc liquid-cooled 4-stroke inline 4-cylinder, DOHC, 16 valves |
Ignition | TCI |
Front Brakes | Dual hydraulic disc |
Rear Brakes | 267mm hydraulic disc |
Fuel Capacity | 17.0 L |
Power | 106.2 hp @ 10, 000 rpm |
Rear Suspension | Swingarm (Link suspension) |
Explains symbols used for warnings, notices, and tips.
Owner's duties and fundamental safe riding techniques.
Details necessary protective gear for rider safety.
Discusses CO, loading, and aftermarket parts risks.
Covers trailer/sidecar restrictions, accessories, and tire care.
Identifies components on the left side of the motorcycle.
Identifies components on the right side of the motorcycle.
Illustrates and labels the various controls and instruments.
Explains the vehicle's anti-theft immobilizer system.
Details the function of the main switch and steering lock.
Explains the meaning of various indicator and warning lights.
Describes the features and operation of the meter unit.
Identifies and explains the function of handlebar switches.
Operation and adjustment of clutch/brake levers, pedals, and fuel cap.
How to adjust front fork and shock absorber settings.
Sidestand operation and ignition cut-off system functions.
Steps and conditions for starting the motorcycle engine.
Explains how to shift gears for optimal performance.
Tips for fuel efficiency and engine break-in procedures.
Safe practices for parking the motorcycle.
Overview of maintenance intervals and the owner's tool kit.
How to check and change engine oil, filter, and coolant.
Tire pressure, wheel inspection, brake pads, and fluid checks.
Drive chain slack, adjustment, and suspension checks.
Replacing fuses, bulb maintenance, and battery care.
Front/rear wheel removal, installation, and troubleshooting charts.
Diagnosing engine overheating and general care tips.
Guidelines for cleaning and protecting the motorcycle.
Proper procedures for short-term and long-term storage.
Location and recording of VIN and model label information.