Why is my Yamaha Grizzly 700 FI Offroad Vehicle having starting problems or poor engine performance?
If your Yamaha Offroad Vehicle is experiencing starting problems or poor engine performance, check the compression and the ignition. If the spark plug is wet, wipe it off with a dry cloth and correct the spark plug gap, or replace the spark plug. If these steps do not resolve the issue, have a Yamaha dealer check the ATV.
What to do if my Yamaha Grizzly 700 FI engine is overheating?
If your Yamaha Offroad Vehicle's engine is overheating, first check the coolant level in the reservoir and radiator. If the coolant level is low, add coolant. If the engine overheats again, or if there is leakage, have a Yamaha dealer check and repair the cooling system.
General| Brand | Yamaha |
|---|---|
| Model | Grizzly 700 FI |
| Category | Offroad Vehicle |
| Language | English |
Key safety points to read before operation.
Highlights ATV's handling differences and potential dangers.
Emphasizes following instructions to prevent serious harm.
Comprehensive rules for safe ATV operation, including gear, terrain, and conduct.
Read and understand all ATV labels for safe operation.
Identifies components on the left side of the ATV.
Identifies components on the right side of the ATV.
Details the location and function of controls and instruments.
Explains the ON/OFF positions of the main switch.
Explains the meaning of various indicator and warning lights.
Describes the display's features like clock, hour meter, and fuel meter.
Details the function of handlebar switches like light and start switches.
Explains how to use the 2WD/4WD switch for terrain selection.
Details the use of the differential gear lock for enhanced traction.
Explains the operation and adjustment of the throttle lever.
Describes the location and operation of the front brake lever.
Explains the operation of the rear brake pedal and lever.
Details shifting between drive ranges like L, H, N, R, P.
Instructions for installing and closing the fuel tank cap.
Information on fuel type, tank capacity, and reserve amount.
Instructions for removing and installing the ATV seat.
Location and access to front and rear storage compartments.
Load limits for the front carrier.
Load limits for the rear carrier.
How to adjust spring preload for suspension tuning.
Usage guidelines for the auxiliary DC power jack.
Essential checks before operating the ATV for safety and performance.
Checking operation, fluid, and pads of the rear brake system.
Ensuring smooth operation and checking cable free play.
Inspecting control cables for smooth operation and lubrication.
Inspecting wheel condition, tread depth, and air pressure.
Ensuring smooth operation and checking pedal pivot.
Ensuring smooth operation and lubricating lever pivots.
Checking axle boots for tears or damage.
Verifying that all nuts, bolts, and screws are tightened.
Verifying proper operation of all instruments, lights, and switches.
Step-by-step guide for safely starting the ATV engine.
Proper procedures for shifting and reversing.
Guidelines for the initial break-in period for optimal engine life.
Steps for safely parking the ATV.
Specific precautions for parking on inclines.
Considerations for adding accessories and loading cargo.
Basic familiarization with ATV operation and riding techniques.
Emphasizes training, practice, and operator responsibility.
Warnings about riding on paved surfaces and off-road terrain.
Techniques for safe and effective turning, especially in 4WD-LOCK.
Proper techniques to avoid overturns when climbing hills.
Guidelines for safe downhill riding, including weight distribution and braking.
How to traverse slopes while maintaining balance and control.
Procedures for safely crossing water bodies.
Importance of carrying the manual and tool kit for maintenance.
Schedule for emission control system maintenance.
Comprehensive schedule for regular maintenance tasks.
Guides for accessing components by removing body panels.
Procedure for inspecting the spark plug for engine condition.
How to check and change engine oil and filter.
Checking and changing final gear oil level and condition.
Checking and changing differential gear oil level and condition.
Procedures for checking and changing engine coolant.
Steps for cleaning and maintaining the air filter element.
Instructions for cleaning the spark arrester to prevent fires.
How to adjust the engine's idle speed for optimal performance.
Procedure for checking and adjusting throttle cable free play.
Importance of valve clearance adjustment by a dealer.
Adjustment procedure for the drive select lever safety cable.
How to check brake pads for wear using indicator grooves.
Inspecting rear brake hose protectors for wear.
Checking brake fluid levels and potential issues.
Checking and adjusting front/rear brake lever free play.
Adjusting brake pedal free play and checking its position.
Verifying correct brake pedal height relative to the footrest.
Checking axle boots for tears or damage.
Inspecting and lubricating control cables for smooth operation.
Inspecting and lubricating brake lever pivots.
Inspecting and lubricating the brake pedal pivot.
Checking wheel bearings for looseness or damage.
Lubrication instructions for the drive shaft universal joint.
Inspecting stabilizer bushes for cracks or damage.
Lubricating upper and lower arm pivots.
Lubricating the knuckle shafts.
Lubricating the steering shaft.
Information on the maintenance-free sealed battery.
Step-by-step guide for replacing fuses.
Instructions for replacing a burnt-out headlight bulb.
How to adjust the headlight beam for proper aiming.
Procedure for replacing tail/brake light bulbs.
Steps for safely removing an ATV wheel.
Proper procedure for installing an ATV wheel.
Guidance for diagnosing and resolving common operational issues.
Detailed instructions for washing and cleaning the ATV.
Guidelines for short-term and long-term storage of the ATV.
Key physical measurements of the ATV.
Engine type, cooling, and cylinder arrangement details.
Specifications for the spark plug type and gap.
Information on the ATV's clutch type.
Details on transmission systems, ranges, and reverse gear.
Specifications for the front suspension system.
Specifications for the rear suspension system.
Details on ignition, charging, battery, and lighting systems.
Information on fuse types and ratings.
Specifications for final gear oil type and quantity.
Specifications for differential gear oil type and quantity.
Coolant capacity and reservoir details.
Air filter type specification.
Fuel type, tank capacity, and reserve amount.
Measurement of the ATV's caster angle.
Measurement of the ATV's trail.
Tire type, size, and manufacturer for the front.
Tire type, size, and manufacturer for the rear.
Maximum loading limits for the ATV and its components.
Recommended and maximum tire pressure specifications.
Specifications for the front wheel type and rim size.
Specifications for the rear wheel type and rim size.
Front brake type and operation details.
Rear brake type details.
Recording key, vehicle, and model identification numbers.
Location and purpose of the key identification number.
Location and purpose of the vehicle identification number.
Location and recording of information from the model label.
Duration and terms of the ATV limited warranty.
List of conditions not covered by the warranty.
Parts excluded from warranty coverage due to wear.
Customer obligations for maintaining warranty coverage.
Process for transferring the warranty to a new owner.
Warranty covering compliance with emissions standards.
To Next Page