How to fix Yamaha HPH-PRO400 when there is no sound?
To resolve the issue of no sound from your Yamaha Headphones, ensure the cable plugs are fully inserted into the headphone jacks (PRO500/400 only) and the playback device. Also, verify that the volume isn't set too low, the playback device is turned on, and that it is not paused.
What to do if the remote control of my Yamaha HPH-PRO400 does not work?
If the remote control of your Yamaha Headphone isn't working, first ensure that the cable plugs are fully inserted into the jacks on both the headphones (PRO500/400 only) and the playback device. If the issue persists, it might be due to connecting a device that isn't compatible with this model.
Why is sound only coming from one side of my Yamaha HPH-PRO400 Headphone?
If you're only hearing sound from one channel on your Yamaha Headphones, make sure the cable plugs are fully inserted into the jacks on the headphones (PRO500/400 only) and the playback device.
How to adjust Yamaha HPH-PRO400 Headphone volume when it's too high or low?
If the headphone volume is too high or too low, adjust the volume on the playback device or remote control as needed.
General| Driver Size | 40 mm |
|---|---|
| Type | Closed-back, circumaural (over-ear) |
| Maximum Input Power | 1000 mW |
| Connector | 3.5 mm |
| Cable Length | 1.2 m (detachable) |
To Next Page
