How to fix Yamaha HPH-PRO500 when there is no sound?
If you're not getting any sound from your Yamaha Headphones, here are a few things to check: * Ensure the headphone cable is fully plugged into both the headphones (for PRO500/400 models) and the playback device. * Confirm that the volume isn't set too low. * Verify that the playback device is both turned on and not paused.
What to do if Yamaha HPH-PRO500 Headphone volume is too high or low?
If the volume on your Yamaha Headphones is too high or too low, you should adjust the volume on the playback device or remote control as needed.
Why is sound only coming from one side of my Yamaha Headphone?
If sound is only coming from one side of your Yamaha Headphones (PRO500/400 only), make sure the cable is fully inserted into both the headphone jack and the playback device.
What to do if Yamaha HPH-PRO500 remote control does not work?
If the remote control isn't working with your Yamaha Headphones (PRO500/400 only), ensure the cable plugs are fully inserted into the headphone and playback device jacks. Also, the connected device might not be compatible with this model. Please see P.3 for details on compatible devices.
General| Driver Size | 50 mm |
|---|---|
| Sensitivity | 106 dB/mW |
| Type | Dynamic |
| Cable Length | 1.2 m |
| Connector | 3.5 mm |
| Maximum Input Power | 1, 000 mW |
| Weight | 310 g (without cable) |
To Next Page
