What to do if I forgot the Yamaha HUB password?
If you've forgotten your password, delete the password file located in the folder where NetworkAmp Manager is installed. Ensure that both the Password and Confirm fields are blank, then click Unlock.
Why does Yamaha HUB Software show 'Skip this device' error after changing latency settings?
If you receive an error message like 'Skip this device' and the Log window displays 'Unexpected data change detected [NHB#xx Latency]' after changing the latency setting and executing 'Connect & send to network', it indicates that the CobraNet module's system software doesn't support changing the latency setting. To change the latency to a value other than 5.33 ms, you'll need to update the CobraNet module. Please contact your Yamaha dealer for details on upgrading.
What to do if the Connect to Network command is unavailable in Yamaha Software?
The 'Connect to Network' command is unavailable if no PC interface has been specified. To resolve this, go to 'General Setup' from the 'Option' menu and specify the interfaces for MIDI IN and MIDI OUT.
How to fix Yamaha Software opening help document in the wrong language?
To fix this, choose the required language from the Help—>Help Topics sub-menu. NetworkAmp Manager will remember your selection and open the same document the next time you choose Help from the help menu, or press the F1 key.
Information regarding copyright, licensing, and usage of the software and manual.
Instructions for installing the NetworkAmp Manager software.
Details on setting up NetworkAmp Manager via the General Setup dialog.
Configuration of CobraNet bundle assignments and latency for ACU16-C.
Setting warning thresholds for wattage, temperature, and impedance.
Locking the software and using COM/MIDI modes.
Solutions for common issues and error messages.
To Next Page
General