Need help?Do you have a question about the Yamaha LF300 and is the answer not in the manual?
General| Brand | Yamaha |
|---|---|
| Model | LF300 |
| Category | Outboard Motor |
| Language | English |
Indicates potential personal injury hazards. Always obey safety messages following this symbol.
Essential safety precautions to observe at all times during operation and maintenance.
Warns about the danger of propeller contact and advises stopping the engine when near water.
Highlights the risk of entanglement with moving parts, advising to keep clear.
Advises caution regarding hot engine parts to prevent burns.
Warns against touching electrical parts during operation to prevent shock.
Details hazards associated with power trim/tilt operation, including crushing.
Explains the function and proper use of the engine shut-off cord to prevent runaway boats.
Covers flammability and explosion risks of gasoline and safe refueling practices.
Provides guidance on handling gasoline spills and first aid measures for exposure.
Warns about carbon monoxide in exhaust gases and advises ventilation.
Covers essential safety measures for boating, including alcohol/drugs, PFDs, and passengers.
Details techniques for scanning, operating defensively, and avoiding collisions.
Explains fundamental waterway rules for navigation and encountering other vessels.
Covers right-of-way rules between vessels, including stand-on and give-way principles.
Details specific rules for meeting, crossing, and overtaking other vessels.
Lists key specifications including dimensions, weight, performance, and power unit details.
Details operating ranges, rated power, and idle speed for different engine models.
Covers crucial aspects like boat horsepower rating and proper mounting procedures.
Warns about improper mounting and emphasizes the need for experienced installation.
Details requirements for the digital electronic control, including start-in-gear protection.
Describes the safety feature preventing engine start unless in neutral.
Provides recommended engine oil grades and quantities based on temperature.
Details recommended gasoline types, octane ratings, and warnings about ethanol.
Describes the function and importance of the engine shut-off cord.
Details the overheat alert, its indicator, and automatic engine speed reduction.
Explains the low oil pressure alert, its indicator, and engine speed reduction.
Indicates when water accumulates in the water separator, requiring attention.
Alerts when battery voltage drops, suggesting charging or dealer consultation.
Indicates engine malfunctions and advises returning to port for diagnosis.
Details the low oil pressure alert indicator and associated actions.
Explains the overheat alert indicator and the necessary steps to take.
Describes the water separator alert indicator and actions for fuel filter water.
General advice on not operating the engine if an alert device has activated.
Describes the overheat alert device, its indicators, and automatic speed reduction.
Explains the low oil pressure alert, its indicators, and recommended actions.
Covers warnings about overpowering boats and improper motor mounting.
Instructions for filling engine oil before initial operation and removing tags.
Details the 10-hour break-in procedure to ensure proper performance and longevity.
Lists pre-operation checks, including inspection of systems and fuel level.
Provides detailed safety instructions for filling the fuel tank, emphasizing fire prevention.
Warns about exhaust gases like carbon monoxide and advises ventilation.
Covers pre-start checks, security system operation, and engine start sequence.
Detailed steps for starting the engine, including safety cord and security system.
Provides instructions for changing engine oil using an oil changer or drain screw.
Step-by-step guide for draining and refilling gear oil in the lower unit.
Addresses common problems like security system issues, starter not operating, and engine starting issues.
Diagnoses issues related to alert buzzers and indicator lights, including cooling and oil pressure.
Provides immediate steps to take if the outboard motor sustains impact damage.
Procedure to address the water separator alert, involving fuel filter maintenance.
Advises immediate dealer inspection for submerged motors to prevent corrosion.
To Next Page
