What to do if Yamaha F8CMH Long handle Outboard Motor fuel management gauge shows incorrect fuel consumption?
If the fuel management gauge shows incorrect fuel consumption, the engine recognition might be wrong (especially for multi-applications). To fix this, default the engine number and turn the key switch on in order from the portside engine to re-memorize each engine number.
What to do if the Yamaha Outboard Motor gauge display does not wake up?
If the gauge display doesn't wake up, it could be due to a lack of electrical power or a damaged gauge. Try these steps: replace the fuse, securely connect the couplers, replace any damaged wires or hubs, or, if necessary, replace the gauge itself.
Why Yamaha F8CMH Long handle Outboard Motor illumination does not light?
If the illumination does not light, it could be due to a lack of electrical power or a damaged gauge. You should try replacing the fuse, connecting the couplers securely, replacing the damaged wire or hub, or replacing the gauge.
How to fix Yamaha F8CMH Long handle Outboard Motor tachometer showing incorrect engine RPM?
If the tachometer shows an incorrect engine RPM, the engine recognition might be wrong (especially for multi-applications). To correct this, push the 'SET' button for 10 seconds to default the engine number, then memorize each engine number again.
What causes Yamaha F8CMH Long handle fuel management gauge to show incorrect remaining fuel?
If the fuel management gauge shows incorrect remaining fuel, the fuel capacity setting may be wrong (specifically for SQR Fuel mgt Gauge). Fill the tank with fuel, and set the correct fuel tank capacity.
What to do if Yamaha F8CMH Long handle Outboard Motor gauge shows “----”?
If the gauge displays '----', it indicates that the digital signal is not being received. Check that the couplers are securely connected and replace any damaged bus wires or hubs.
Why Yamaha Outboard Motor Speedometer or Comb. Speedometer & Fuel mgt gauge shows incorrect fuel level?
If the speedometer or combination speedometer & fuel management gauge shows an incorrect fuel level, the fuel sensor selection is likely wrong. Set up the fuel sensor to the correct resistance.
How to fix Yamaha F8CMH Long handle Outboard Motor trim gauge showing incorrect position?
If the trim gauge shows an incorrect position, the initial position setting might be wrong, or the trim sender could be damaged. Put the motor in the fully trimmed-in position and reset the initial (zero) trim angle. If that doesn't work, replace the trim sender.
Why Yamaha Outboard Motor gauge operates unstably?
If the gauge operates unstably, it could be because a resistor is not connected to the ending hubs. Connect the gray 6-pin cap to the ending multi-hubs.
What causes Yamaha F8CMH Long handle Outboard Motor gauge response to be poor or down?
If the gauge response is poor or down, a market obtainable unit connected to the system may have failed, or the signal volume has exceeded 50% of the capacity. Try replacing the unit or removing the heavy signal output unit.
General| Brand | Yamaha |
|---|---|
| Model | F8CMH Long handle |
| Category | Outboard Motor |
| Language | English |
Procedure for uncrating outboard motors from typical steel frames.
Guidelines for mounting outboard motors for optimal performance and reliability.
Provides overall dimension items for outboard motors.
Details on propeller specifications, including types and identification.
Guidance on selecting the appropriate propeller for different applications.
Applications for 2009 propellers, detailing models, sizes, and materials.
Overview of remote control applications and model compatibility.
Details on various switch panels and their applications.
Information on selecting and routing remote control cables.
Details on the 6x4 multi-function tiller handle and its features.
Kit contents for the US market multi-function tiller handle.
Procedures for installing gauges, including mounting location and angle.
Functions as fuel flow, consumption, and economy gauge; includes warning indicators.
Essential instrument for monitoring engine speed and performance.
Digital tachometer with elapsed hour meter, trim meter, and oil warning.
Warns of cooling system problems and monitors coolant pressure.
Measures boat speed by impact force of water; digital version includes extra functions.
Indicates cooling water temperature and warns of overheating.
Table of common troubles and their solutions for system or gauge issues.
Important information for selecting a battery for sure engine start and operation.
Wiring instructions for battery systems, including isolator and twin-battery setups.
Checklist for pre-delivery inspection to enhance customer satisfaction.
To Next Page
