Yamaha F80A Service Manual (English)

Other manuals for Yamaha F80A

Questions and Answers:

S
Shelby MannAug 6, 2025
What to do if my Yamaha Outboard Motor won't start but the starter operates?
- A
  Angela ChristensenAug 7, 2025
  If your Yamaha Outboard Motor's starter operates but the engine won't start, consider the following: * Ensure the fuel tank is filled with clean, fresh fuel. * Check and clean or replace the fuel filter if it's clogged. * Inspect spark plugs, cleaning or replacing them with the recommended type if they are fouled or incorrect. * Verify that the spark plug caps are correctly fitted. * Check for damaged ignition wiring or poor connections, tightening loose connections or replacing worn wires. * Make sure the engine stop switch lanyard is attached and the shift lever is in neutral.
M
Monique KingAug 18, 2025
Why won't my Yamaha F80A starter operate?
- R
  Richard SheaAug 18, 2025
  If the starter on your Yamaha Outboard Motor won't operate, here are some things to check: 1. Verify the battery condition and use a battery with the recommended capacity. 2. Ensure battery connections are tight and clean any corrosion from the terminals. 3. Check if the fuse for the electric start circuit is blown, and replace it with the correct amperage after repairing any electric overload. 4. Confirm the engine stop switch lanyard is attached and the shift lever is in neutral.
S
Susan RyanAug 25, 2025
How to fix a Yamaha F80A Outboard Motor when the starter won't operate?
- V
  vasquezerinAug 25, 2025
  If your Yamaha Outboard Motor's starter won't operate, here's what to check: * Ensure the engine stop switch lanyard is attached. * Make sure the shift lever is in neutral. * Check the battery condition; a weak or low battery can be the culprit. Use a battery with the recommended capacity. * Inspect battery connections for looseness or corrosion; tighten cables and clean terminals if needed. * Examine the fuse for the electric start circuit; if blown, check for the cause of the overload, repair, and replace the fuse with the correct amperage. * If none of these steps work, the starter components may be faulty, and you should have it serviced by a Yamaha dealer.