Need help?Do you have a question about the Yamaha M-4 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.005% |
|---|---|
| Damping Factor | 100 |
| Signal to Noise Ratio | 120 dB |
| Weight | 12.5kg |
| Power Output | 120W per channel into 8Ω (stereo) |
| Input Sensitivity | 1V |
| Dimensions | 435 x 112 x 375mm |
Explains cascade-connected differential two-stage circuit and FET input for stability and performance.
Describes the three-stage emitter follower with complementary OCL SEPP for wide bandwidth.
Highlights large capacitors and separate power supplies for low distortion and stable operation.
Mentions mylar/styrol capacitors, layout, and general design for audio characteristics.
Covers installation, ventilation, handling, unauthorized opening, power cord, record playback, cleaning, and service.
Covers proper AC connection and speaker impedance/terminal setup.
Details connecting to control amp, input sensitivity, and mode switch functions.
Describes the function of the POWER button and initial sound delay.
Explains the push-button switches for selecting speaker terminals A and B.
Details the peak and overload indicators for monitoring output levels and clipping.
To Next Page
