Yamaha MC1602 - Input;Output Characteristics

15
= INPUT CHARACTERISTICS
| XLR-3-31 type
LO-Z 4k ohms 50 ~ 600 ohms | —80dB (0.08mV) —60dB (0.8mV) —34dB (15.5mV) (Balanced)
Microphones
"40dB(775mV)
|
—20dB
(77.5mV)
|
+6dB
(1557)
and
600
ohms
Lines!
—20dB
(77.5mV)
OdB
(775mV)
|
+26dB
(15.5V)
Рпопе
Јаск
(IRS)
ПЕСЕЕИ 600 ohms Lines| —26dB (38.8mV) ! —6dB (388mV) | +2008 (7.75У) [Phone Jack (TRS)
: 600 ohms Lines| —6d8 (388mV) +4ав (1.23%) — | «20d8 (7 75V) QU bala aed)
600
ohms
Lines}
—16dB
(123mV)
+дав
(1,23М)
DEI
(попе
ас
50 ~ 600 chms B _ XLR-3-31 type
i Microphones —70dB (0.25mv) 5048 (2.45mV) 24dB (48.9mV] (Unbalanced) -
HI-Z 10k ohms
XLR-3-32type _.
150 ohms 600 ohms Lines +4dB (1.23V) +24dB (12.3М) (Balanced)
> 150 ohms 600 ohms Lines +40B (1.23V) 420dB (7.75V) ое чаек
600 ohms —6dB (388mV) 420dB (7.75V) Phone Jack ims)
lOO
ohms
Stereo
Phone
Jack
.
40
ohms
Phones
130mW
(Unbalanced)
** Input level required to produce rated * 4dB output level.
e OdB - 0.775Vr.m.s.
SERVICE
This product is supported by Yamaha's worldwide network ‘of
factory trained and qualified dealer service personnel. In the event
. of a problem, contact your nearest Yamaha dealer,