Yamaha MC1602 - Page 9

(B VU Meters and METER Assign Switches (AUX 1/AUX 2/AUX 3/CUE)
The MC-series mixing console feature three VU meters with built-in LED peak indicators for
monitoring signal levels. The rightmost meter pair(L — ST — R) continuously monitors signals
on the main stereo program buss. The AUX/CUE meter can be switched to monitor signals on
the AUX 1, AUX 2, AUX 3 or CUE busses by pressing the corresponding METER assign
switch. :
‚ш
а
INPUT
AUX SEND 1
AUX SEND 2 AUX 1,
AUX SEND 3
AUX
SEND
1
А
AUXYCUE
AUX
SEND
2
ћи
о
[+
AUX
SEND
3
e
Bio
“
с
(B CUE/PHONES Control and PHONES Jack
The
CUE/PHONES
control
adjusts
the
level
of
the
cue
signal
sent
to
the
PHONES
jack
so
you
can
set
the
most
confortable
headphone
monitoring
level.
The
stereo
phone
jack
accepts
any
standard stereo headphones. | | |
* The STEREO cue signal appears in stereo at the phones jack, while the channel and AUX
. cue signals are monaural. |
INPUT
AUX SEND 1
AUX SEND 2
AUX SEND 3
PHONES
CUE /PHONES
() STEREO CUE Switch
Turning this switch ON sends the main stereo program buss signal, in stereo, to the stereo
PHONES jack via the CUE/PHONES control. The STEREO CUE switch can normally be turned
ON to permit headphone monitoring of the main stereo program, but it must be turned OFF
to individually monitor input channel or AUX buss cue signals.