MODX Supplementary Manual
3
Additional New Effect types
The following new Effect types have been added in the Misc Category.
Effect type Description Parameter Description
VCM Mini Filter Makes the sound “fatter”
and tighter.
This effect emulates the
characteristics of analog
synthesizers.
Cutoff Determines the Cutoff Frequency of the Filter.
Resonance Determines the Resonance of the filter.
Type Determines the type of the filter.
Texture Adds various changes to the texture of the sound effect.
Input Level Determines the input level of the signal.
Dry/Wet Determines the balance of the dry sound and the effect sound.
Output Level Determines the level of the signal output from the effect block.
Effect type Description Parameter Description
VCM Mini Booster Creates a unique sonic
texture.
This effect emulates the
characteristics of analog
synthesizers.
EQ Frequency Determines the Frequency of the EQ.
Resonance Determines the Resonance of the EQ.
EQ Gain Determines the level gain of the EQ.
Type Determines the type of the booster effect.
Texture Adds various changes to the texture of the sound effect.
Input Level Determines the input level of the signal.
Output Level Determines the level of the signal output from the effect block.
Effect type Description Parameter Description
Wave Folder Makes various changes to
the sound over time by
varying and controlling
the harmonic content.
Fold Determines the degree of the distortion effect.
Fold Type Determines the sonic texture of the distortion.
LFO Depth Determines the depth of the modulation.
LFO Speed Determines the frequency of the modulation.
LFO Shape Alters the wave shape for modulation.
Input Level Determines the input level of the signal.
Dry/Wet Determines the balance of the dry sound and the effect sound.
Output Level Determines the level of the signal output from the effect block.
SEQ Depth Determines the depth of the built-in sequencer in the effect.
SEQ Clock Determines the speed of the built-in sequencer in the effect.
SEQ Pattern Selects the pattern of the built-in sequencer in the effect.
SEQ Variation Changes the motion of the built-in sequencer in the effect.
SEQ Ph Reset Sets the mode for resetting the pattern of the built-in sequencer in the
effect.
To Next Page
Loading...
Need help?
General
