Yamaha MOTIF ES6 Software Installation Guide

6 TOOLS for MOTIF ES6/MOTIF ES7/MOTIF ES8 Installation Guide
MIDI port setting
(when starting the software as a stand-
alone application)
Before setting the MIDI port on the Voice Editor or Multi Port Editor, you
should set the MIDI port from the MIDI SETUP toolbar.
n
When you start the Voice Editor or Multi Part Editor as a plug-in application in an Open
Plug-in Technology compatible application, refer to the PDF manual of the respective
software.
1 Start the Voice Editor or Multi Part Editor.
2
Click the MIDI Setup button in the Toolbar called up via step #1.
3 In the MIDI Setup window called up via step #2, click the [▼] button at the
right end of each box and make the port settings as shown.
n
In order for MIDI ports to be available here, you’ll need to select the relevant MIDI
port within each application software (Voice Editor or Multi Port Editor). This is
the port that you’ll use in the various software. For details on setting the MIDI port,
refer to the on-line manual of each software.
MIDI Setup button
English

Yamaha MOTIF ES6 Specifications

General

Keyboard	61 keys, Initial Touch/Aftertouch
Polyphony	128 notes
Display	240 x 64 dot backlit LCD
Wave ROM	175MB (when converted to 16-bit linear format)
Sequencer	16 Tracks, Approx. 226, 000 notes
Arpeggiator	1, 787 types
Connectors	MIDI In/Out/Thru, USB, Foot Controller, Foot Switch
Power Supply	AC Adaptor (PA-300 or an equivalent recommended by Yamaha)
Storage	SmartMedia
User Voices	128 normal voices + 32 drum kits