6
Starting the Voice Editor
After installing the Voice Editor and making the required connection, follow the instructions below
to start the Voice Editor.
Windows
n
In order to use the Voice Editor with your tone generator, you’ll need to set the MIDI in/out ports. (page 14)
●
Starting Voice Editor from Studio Manager
1. Start Studio Manager as a plug-in within DAW software compatible with Total Recall, or as a
stand-alone application.
2. Start Voice Editor from Studio Manager.
For more information, refer to the installation guide and Studio Manager PDF manual.
●
Starting the Voice Editor in the sequencer software compatible with OPT as a plug-in
software.
The Voice Editor can be used as a plug-in software in any host application compatible with
Open Plug-in Technology (OPT).
Refer to the owner’s manual of the host application (sequencer, etc.) for details on using plug-in
software.
n
For OPT-compatible software, the Voice Editor settings will be saved along with the song file.
1. Start the host application.
2. Select “MOTIF ES Voice Editor” in the host application’s “Plug-in” menu.
Macintosh
1. Start the Studio Manager as a plug-in for the DAW compatible with the Total Recall or a
stand-alone application.
2. Start the Voice Editor from the Studio Manager.
For more information, refer to the installation guide and Studio Manager PDF manual.
To Next Page
Loading...
Need help?
General
