MULTI BAND COMP 2
PITCH CHANGE1
PITCH CHANGE2
03: Fine 1 and 04: Fine 2 for PITCH CHANGE2 are described in cent.
AUTO WAH
AUTO WAH DISTORTION
AUTO WAH OVERDRIVE
VINTAGE AUTO WAH 1 – 2
When Bottom > Top, the sound will not be modulated and only the Bottom value is available.
TOUCH WAH
TOUCH WAH+DISTORTION
TOUCH WAH+OVERDRIVE
VINTAGE TOUCH WAH 1 – 2
When Bottom > Top, the sound will not be modulated and only the Bottom value is available.
WAH+DIST+DELAY
WAH+OVERDRIVE+DELAY
LO-FI
No. Parameter Range Value Table No.
1 Low Attack 1ms – 200ms (0 – 29) 8
2 Low Release 10ms – 3000ms (0 – 23) 9
3 Low Threshold -54dB – -6dB (73 – 121)
4 Low Ratio 1 – 20.0 (0 – 7) 10
5 Low Gain -∞ – +18dB (0 – 55) 15
6 Mid Attack 1ms – 200ms (0 – 29) 8
7 Mid Release 10ms – 3000ms (0 – 23) 9
8 Mid Threshold -54dB – -6dB (73 – 121)
9 Mid Ratio 1 – 20.0 (0 – 7) 10
10 Mid Gain -∞ – +18dB (0 – 55) 15
11 High Attack 1ms – 200ms (0 – 29) 8
12 High Release 10ms – 3000ms (0 – 23) 9
13 High Threshold -54dB – -6dB (73 – 121)
14 High Ratio 1 – 20.0 (0 – 7) 10
15 High Gain -∞ – +18dB (0 – 55) 15
16 Divide Freq 0 – 89 (0 – 89) 16
No. Parameter Range Value Table No.
01 Pitch -24 – +24 (40 – 88)
02 Initial Delay 0.1ms – 400.0ms (0 – 127) 7
03 Fine1 -50 – +50 (14 – 114)
04 Fine2 -50 – +50 (14 – 114)
05 Feedback Level -63 – +63 (1 – 127)
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 PAN1 L63 – C – R63 (1 – 127)
12 Output Level1 0 – 127 (0 – 127)
13 PAN2 L63 – C – R63 (1 – 127)
14 Output Level2 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 LFO Depth 0 – 127 (0 – 127)
03 Cutoff Frequency Offset 0 – 127 (0 – 127)
04 Resonance 1 – 12.0 (10 – 120)
06 – 09: Same as marked with *.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
No. Parameter Range Value Table No.
01 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 LFO Depth 0 – 127 (0 – 127)
03 Cutoff Frequency Offset 0 – 127 (0 – 127)
04 Resonance 1 – 12.0 (10 – 120)
06 – 09: Same as marked with *.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Drive 0 – 127 (0 – 127)
12 Dist Low Gain -12dB – +12dB (52 – 76)
13 Dist Mid Gain -12dB – +12dB (52 – 76)
14 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
15 Output Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 Speed 0.100Hz – 20.00Hz (0 – 254) 24
02 Bottom 0 – 127 (0 – 127)
03 Top 0 – 127 (0 – 127)
04 Resonance Offset -12.0 – +12.0 (40 – 88)
05 LFO Wave Sin, Trp (0 – 1)
06 Type High, Mid, Low, Bass (0 – 3)
07 OverDrive 0.0dB – +40.0dB (0 – 80)
08 Output -20.0dB – +10.0dB (24 – 84)
13 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
14 EQ Low Gain -12dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
16 EQ High Gain -12dB – +12dB (52 – 76)
No. Parameter Range Value Table No.
01 Sensitive 0 – 127 (0 – 127)
02 Cutoff Frequency Offset 0 – 127 (0 – 127)
03 Resonance 1 – 12.0 (10 – 120)
06 – 09: Same as marked with *.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
No. Parameter Range Value Table No.
01 Sensitive 0 – 127 (0 – 127)
02 Cutoff Frequency Offset 0 – 127 (0 – 127)
03 Resonance 1 – 12.0 (10 – 120)
06 – 09: Same as marked with *.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Drive 0 – 127 (0 – 127)
12 Dist Low Gain -12dB – +12dB (52 – 76)
13 Dist Mid Gain -12dB – +12dB (52 – 76)
14 LPF Cutoff Frequency 1.0kHz – 20.0kHz (34 – 60) 3
15 Output Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 Sensitivity 0 – 127 (0 – 127)
02 Bottom 0 – 127 (0 – 127)
03 Top 0 – 127 (0 – 127)
04 Resonance Offset -12.0 – +12.0 (40 – 88)
05 Direction up, down (0 – 1)
06 Type High, Mid, Low, Bass (0 – 3)
07 OverDrive 0.0dB – +40.0dB (0 – 80)
08 Output -20.0dB – +10.0dB (24 – 84)
11 Attack Offset -5 – +5 (59 – 69)
13 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
14 EQ Low Gain -12dB – +12dB (52 – 76)
15 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
16 EQ High Gain -12dB – +12dB (52 – 76)
No. Parameter Range Value Table No.
01 Delay Time 0.1ms – 1638.3ms (1 – 16383)
02 Delay Feedback Level -63 – +63 (1 – 127)
03 Delay mix 0 – 127 (0 – 127)
04 Dist Drive 0 – 127 (0 – 127)
05 Dist Output Level 0 – 127 (0 – 127)
06 Dist EQ Low Gain -12dB – +12dB (52 – 76)
07 Dist EQ Mid Gain -12dB – +12dB (52 – 76)
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 Wah Sensitive 0 – 127 (0 – 127)
12 Wah Cutoff Frequency 0 – 127 (0 – 127)
13 Wah Resonance 1 – 12.0 (10 – 120)
14 Wah Release 10ms – 680ms (52 – 67) 12
No. Parameter Range Value Table No.
01 Sampling Freq Control 44.1kHz – 344Hz (0 – 127) 13
02 Word Length 1 – 127 (1 – 127)
03 Output Gain -6dB – +36dB (0 – 42)
04 Pre-LPF Cutoff Frequency 63Hz – 20.0kHz (10 – 60) 3
05 Filter Type thru, Power Bass, Radio,
Telephone, Clean, Low
(0 – 5)
06 Pre-LPF Resonance 1 – 12.0 (10 – 120)
07 Bit Assign 0 – 6 (0 – 6)
08 Emphasis off/on (0 – 1)
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
15 Input Mode mono/stereo (0 – 1)
Data List
33
Effect Parameter List
To Next Page
Loading...
