Need help?Do you have a question about the Yamaha MT-10 2020 and is the answer not in the manual?
General| Bore x Stroke | 79.0 mm x 50.9 mm |
|---|---|
| Compression Ratio | 12.0:1 |
| Fuel System | Fuel Injection |
| Transmission | 6-speed |
| Front Suspension | 43mm inverted fork, fully adjustable |
| Front Brakes | Dual 320mm hydraulic disc, ABS |
| Rear Brakes | 220mm hydraulic disc, ABS |
| Front Tire | 120/70ZR17 |
| Rear Tire | 190/55ZR17 |
| Seat Height | 825 mm |
| Starter System | Electric |
| Final Drive | Chain |
| Width | 800 mm |
| Engine Type | Liquid-cooled, 4-stroke, DOHC, 4-valve |
| Fuel Capacity | 17 liters |
| Horsepower | 160 HP |
| Maximum Power | 160 HP @ 11500 rpm |
| Maximum Torque | 111 Nm @ 9000 rpm |
| Length | 2, 095 mm |
| Height | 1110 mm |
| Wheelbase | 1, 405 mm |
| Torque | 111 Nm |
Guidelines for safe riding, pre-operation checks, and hazard awareness.
Function and operation of the traction control system for enhanced grip.
Details on the speedometer, tachometer, fuel meter, and other displays.
Checks for fuel level, lines, and tank condition before operation.
Checking the coolant level in the reservoir and cooling system.
Checks for front brake operation, fluid level, pads, and hydraulic system.
Checks for rear brake operation, fluid level, pads, and hydraulic system.
Checking clutch operation, cable, and lever free play.
Ensuring smooth throttle operation and checking free play.
Inspection of tires for damage, tread depth, and air pressure.
Procedures and conditions required for starting the engine.
Checking engine oil level and procedures for oil and filter changes.
Tire inspection, air pressure checks, and replacement guidelines.
Procedure for checking and replenishing the brake fluid level.
Guides for diagnosing starting problems and poor engine performance.
To Next Page