Yamaha MT07N - Clutch Lever; Shift Pedal

Instrument and control functions
4-11
4
To use the “TRIP” switch, move the
“TRIP/INFO” switch in direction (a). To
use the “INFO” switch, move the
“TRIP/INFO” switch in direction (b).
EAU12823
Clutch lever
To disengage the drivetrain from the
engine, such as when shifting gears,
pull the clutch lever toward to the han-
dlebar. Release the lever to engage the
clutch and transmit power to the rear
wheel.
TIP
The lever should be pulled rapidly and
released slowly for smooth shifting.
(See page 6-3.)
EAU12876
Shift pedal
The shift pedal is located on the left
side of the motorcycle. To shift the
transmission to a higher gear, move
the shift pedal up. To shift the trans-
mission to a lower gear, move the shift
pedal down. (See page 6-3.)
1. “TRIP/INFO” switch
1
(b)(b)
(a)(a)
(b)
(a)
1. Clutch lever
1
1. Shift pedal
111
UBAT11E0.book Page 11 Monday, September 6, 2021 7:48 AM