Replacing
the Gear Oi I
During the break-in period, replace the gear oil after
30
days from
the
date
of
purchase or after
300
miles
(500
l<m)
running.
After the first time,
See
page
21.
Transmission oil replacement.
To drain the oil from the bottom of the crankcase, remove the oil drain
plug.
1:.,,,-
,
.,
L
..
...
j.·
ct
.4
--
,
,
41
•
.,
t
•
-·
-
;.\
l"
.,
-
,.
After draining the oil, fully tighten the oil drain bolt, and fill with the specified
amount
of
new
oil.
Oil
•••••••••••••••..............
Yamalube
4-Cycle
or
SAE
"SE"
lOW/30
MOTOR
OIL
Oil
Amount • • • • • • •
••
• • • •
••
•
••
1
.0
quarts
(1
.0
litres)
Keep
the oil level
between
these level marks.
When
checking transmission oil level, with the dip stick, let the
unscrewed
dip stick just rest
on
the case threads. Also, be sure the machine is
posi-
tioned straight
up
and
on
both wheels. The oil level should indicate
on
th
e
stick between the minimum
and
maximum marks.
Note:
DO
NOT ADD ANY
CHEMICAL
ADDITIVES. TRANSMISSION
OIL
ALSO LUBRICATES
THE
CLUTCH
AND ADDITIVES
COULD
CAUSE
THE
CLUTCH TO SLIP.
-26-
To Next Page
Loading...
