EasyManua.ls Logo

Yamaha NS-50F User Manual

Yamaha NS-50F
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DeutschFrançais EspañolEnglish
E-1
NS-50F
SPEAKER SYSTEM
Thank you for choosing a Yamaha speaker system.
Caution
Read the following before using the speaker:
To assure the finest performance, please read
this manual carefully. Keep it in a safe place for
future reference.
Install the speakers in a cool, dry, clean place
away from windows, heat sources, sources of
excessive vibration, dust, moisture and cold.
Avoid sources of humming (transformers,
motors). To prevent fire or electric shock, do
not expose the speakers to dripping or
splashing.
To prevent the enclosure from warping or
discoloring, do not place the speakers where
they will be exposed to direct sunlight or
excessive humidity.
Do not place the following objects on top of the
speakers:
1. Glass, china, etc.
If glass etc. falls by vibrations and breaks, it
may cause personal injury.
2. A burning candle etc.
If the candle falls by vibrations, it may
cause fire and personal injury.
3. A vessel with water in it
If the vessel falls by vibrations and water
spills, it may cause damage to the unit, and/
or you may get an electric shock.
Do not place the speakers where foreign
objects such as water drips might fall. It might
cause a fire, damage to this unit, and/or
personal injury.
Do not place the speakers where they are liable
to be knocked over or struck by falling objects.
Stable placement will also ensure better sound
performance.
Secure placement or installation is the owner’s
responsibility. Yamaha shall not be liable for
any accident caused by improper placement or
installation of speakers.
Any time you note distortion, reduce the
volume of your amplifier immediately. Make
sure the input power does not exceed the
specified maximum input power, otherwise the
speakers will be damaged.
Do not attempt to clean the speakers with
chemical solvents as this might damage the
finish. Use a clean, dry cloth.
Do not attempt to modify or fix the speakers.
Contact qualified Yamaha service personnel
when any service is needed. The cabinet
should never be opened for any reasons.
Note:
This speaker is magnetically shielded, but placing
them too close to a TV may impair the TV picture. If
this happens, move the speaker away from the TV.
Owner’s Manual
URG
NS-F50_urg.book Page 1 Wednesday, August 25, 2004 3:02 PM
Question and Answer IconNeed help?

Do you have a question about the Yamaha NS-50F and is the answer not in the manual?

Yamaha NS-50F Specifications

General IconGeneral
TypeFloor-standing speakers
Speakers2-way
Dimensions (WxDxH)233 x 271 x 880 mm
TweeterYes
Woofer diameter160 mm
Tweeter diameter30 mm
Audio output channels- channels
Sensitivity91 dB
Frequency range35 - 35000 Hz
RMS rated power80 W
Crossover frequency2000 Hz
Peak Music Power Output (PMPO)240 W
Product colorCherry (fruit)
Weight and Dimensions IconWeight and Dimensions
Depth271 mm
Width233 mm
Height880 mm
Weight12500 g

Summary

Caution

Read the following before using the speaker

General safety guidelines for speaker usage, emphasizing careful handling and placement.

Magnetic Shielding Note

Information regarding magnetic shielding and potential TV picture interference, advising speaker placement.

Precautions When Positioning the Speakers

Safe and Proper Speaker Use

General guidelines for safe speaker placement and handling to prevent damage or injury.

Using Stands for Stability

Instructions and advice on using included stands to enhance speaker stability and prevent falls.

Placing the Speakers

Normal Stereo Speaker Placement

Guidance on angling speakers for optimal stereo sound performance, forming a triangle with the listener.

Surround Sound System Placement

Advice on positioning speakers around a TV for a solid sound image in a surround sound setup.

Attaching the Stands

Stand Attachment Procedure

Step-by-step instructions for securely attaching the speaker stands to the speaker base.

Connecting Your Speakers

Speaker Cable Preparation

How to prepare speaker cables by stripping insulation and twisting wires for proper connection.

Speaker Hookup Guide

Visual guide and instructions for connecting speaker cables to the amplifier and speakers correctly.

Banana Plug Connection

Steps for using banana plugs to connect speakers to the terminals, ensuring correct polarity.

Removing the Front Cover

Cover Removal and Attachment

Instructions on how to safely remove and reattach the speaker's front cover without damaging the drive units.

Front Cover Safety Note

A caution regarding handling the front cover, advising against touching drive units or using excessive force.

Specifications

Related product manuals