Need help?Do you have a question about the Yamaha P50-m and is the answer not in the manual?
General| Brand | Yamaha |
|---|---|
| Model | P50-m |
| Category | Recording Equipment |
| Language | English |
Notices regarding modifications, cable usage, and interference management for FCC compliance.
Warnings about lithium batteries, handling, replacement, and proper disposal procedures.
Covers power adapter, cord safety, placement recommendations, and service charge policies.
Advises on safe volume levels to prevent hearing damage and environmental friendliness.
Details safe handling, replacement procedures, and disposal of various battery types.
Lists essential items included in the P50-m package for user verification.
Recommends sections to read in order for optimal understanding and usage.
Guidelines for location, power, connections, and physical handling to ensure safety.
Instructions for cleaning the instrument safely using appropriate materials.
Avoids interference and states instrument is not user-serviceable.
Specifies using high-quality MIDI cables to prevent data errors.
Identifies and describes the main front panel controls for power, sound, and selection.
Details controls for adjusting voice tone (brightness, reverb) and tuning.
Explains touch sensitivity, MIDI channel, LED display, and EQ sliders.
Identifies and describes MIDI, DC IN, and Audio OUTPUT jacks.
Lists necessary hardware and cables for connecting the P50-m.
Step-by-step guide for connecting MIDI, audio, and power.
Details MIDI channel and output mode settings for complex setups.
Explains setting the Program Change Table for GM compatibility.
Safe sequence for powering on the P50-m and connected equipment.
How to play the built-in demo song to showcase voices.
How to play all demo songs, which resets settings to factory defaults.
How to choose internal voices using the SELECT button and DATA dial.
How to select voices remotely using MIDI Program Change messages.
Modifies the tonal quality of a voice by adjusting brightness levels.
Controls the amount of reverb effect applied to the selected voice.
Adjusts the timbre of the sound across low, mid, and high frequency bands.
Fine-tunes the overall pitch of the instrument, useful for ensemble playing.
Instantly changes the key transposition setting of the P50-m.
Selects from eight levels of touch response for playing dynamics.
Configures the MIDI channel for receiving data from other devices.
Configures how program changes are handled, especially for XG applications.
Sets a unique MIDI identification number for devices in a chain.
Configures note reception for expanding polyphony when linking units.
Determines which MIDI data is relayed through the MIDI OUT terminal.
Resets all custom settings to the original factory configuration.
Provides solutions for common problems like no power or no sound.
Explains the meaning of specific error codes (Er1-Er5) for diagnostics.
Lists key technical details including dimensions, weight, and power supply.
Details available reverb and chorus effect types and their descriptions.
Lists parameters, ranges, and values for controlling reverb and chorus effects.
Details MIDI messages for notes, aftertouch, and control changes.
Explains the structure of SysEx messages for device control.
Covers Omni, Mono, Poly modes, and controller reset messages.
Details parameter changes for XG and P50-m system data.
Describes formats for XG and P50-m bulk data transmission.
Explains how MIDI data is re-transmitted via the MIDI OUT port.
Lists system-level MIDI parameter changes for XG compatibility.
Lists part-level MIDI parameter changes for XG compatibility.
Lists system-level MIDI parameter changes specific to the P50-m.
Details MIDI parameter changes for remote switch functions on the P50-m.
Outlines which MIDI functions the P50-m sends and receives.
Lists supported MIDI channel and system messages, including modes.
To Next Page
