Yamaha PW50 User Manual

Consumer information
10-1
10
EAU53562
Identification numbers
Record the vehicle identification num-
ber, engine serial number, and the
model label information in the spaces
provided below. These identification
numbers are needed when registering
the vehicle with the authorities in your
area and when ordering spare parts
from a Yamaha dealer.
VEHICLE IDENTIFICATION NUMBER:
ENGINE SERIAL NUMBER:
MODEL LABEL INFORMATION:
EAU26401
Vehicle identification number
The vehicle identification number is
stamped into the steering head pipe.
Record this number in the space pro-
vided.
TIP
The vehicle identification number is
used to identify your motorcycle and
may be used to register your motorcy-
cle with the licensing authority in your
area.
EAU26442
Engine serial number
The engine serial number is stamped
into the crankcase.
EAU26481
Model label
The model label is affixed to the frame
under the seat. (See page 4-8.) Record
the information on this label in the
1. Vehicle identification number
1
1. Engine serial number
1. Model label
1
1
U2SA82E0.book Page 1 Monday, June 8, 2015 1:09 PM

Yamaha PW50 Specifications

General

Bore x Stroke	40.0mm x 39.2mm
Compression Ratio	6.0:1
Ignition	CDI
Final Drive	Chain
Rear Suspension	Unit swingarm; 2.0-in travel
Front Brake	Drum
Rear Brake	Drum
Front Tire	2.50-10-4PR
Rear Tire	2.50-10-4PR
Overall Length	49.0 in
Seat Height	18.7 in
Wheelbase	33.7 in
Wet Weight	90 lb
Fuel System	Carburetor
Transmission	Automatic
Front Suspension	Telescopic fork
Fuel Capacity	0.5 gal
Engine Type	49cc air-cooled 2-stroke; reed-valve inducted