Need help?Do you have a question about the Yamaha Q2031A and is the answer not in the manual?
General| Type | Stereo Graphic Equalizer |
|---|---|
| Frequency Bands | 31 |
| Frequency Range | 20 Hz to 20 kHz |
| Output Level | +4 dBu |
| Gain | ±12 dB |
| THD | 0.05% |
| Channel separation | 70 dB |
| Maximum Input Level | +22 dBu |
| Power Consumption | 20 W |
| Output Impedance | 150Ω |
| Power Supply | AC 120V, 60Hz |
| Noise | -90dBu |
Install away from direct sunlight, extreme temperatures, humidity, dust, and vibrations.
Avoid applying undue force to switches and controls.
Pull the power cord by the plug, never the cord itself.
Turn off power before making connections and disconnect before moving.
Clean the cabinet with a soft, dry cloth; avoid solvents.
Unplug during thunderstorms to prevent surge damage.
Turns the unit on/off and illuminates the power indicator LED.
Selects +/-12dB or +/-6dB boost/cut range with LED indication.
Engages or bypasses the High-Pass Filter for each channel.
Bypasses or activates the equalizer section for sound comparison.
Adjusts input sensitivity and overall signal level.
Continuously adjusts HPF rolloff frequency from 20 Hz to 200 Hz.
Adjusts boost/cut for 31 bands across 20 Hz to 20 kHz spectrum.
Balanced/unbalanced inputs and input level switch settings.
Balanced/unbalanced outputs and output level switch settings.
Switches and sockets for optional input transformers.
Minimizing room irregularities for flat speaker response.
Reducing feedback frequencies in stage monitor systems.
To Next Page
