Need help?Do you have a question about the Yamaha QT 50F and is the answer not in the manual?
General| Displacement | 49cc |
|---|---|
| Transmission | Automatic |
| Fuel System | Carburetor |
| Ignition | CDI |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brake | Drum |
| Rear Brake | Drum |
| Final Drive | Chain |
| Bore x Stroke | 40.0 mm x 39.2 mm |
| Starting System | Kick |
| Engine Type | 2-stroke, air-cooled, single cylinder |
Identifies vehicle's frame and engine serial numbers for model and production tracking.
Lists and illustrates specific tools and additional supplies required for maintenance and repair procedures.
Provides an overview of the chapter's purpose and the importance of preventive maintenance.
Details recommended service intervals for various components based on mileage or time.
Covers inspection and adjustment procedures for engine components like the carburetor and autolube pump.
Outlines inspection and adjustment procedures for chassis components such as brakes, wheels, and suspension.
Details inspection and adjustment procedures for the ignition, charging, and lighting systems.
Step-by-step guide for safely removing the engine from the motorcycle frame.
Detailed instructions for taking apart engine components in a specific order.
Procedures for inspecting engine parts for wear or damage and necessary repair steps.
Guides on reassembling engine components and making necessary adjustments.
Steps for reinstalling the engine back into the motorcycle frame after overhaul.
Instructions for inspecting, repairing, and adjusting the carburetor for optimal performance.
Procedures for inspecting and handling the reed valve assembly for proper engine operation.
Covers removal, inspection, and installation of the front wheel assembly.
Covers removal, inspection, and installation of the rear wheel assembly.
Details the removal and inspection procedures for the shaft drive system.
Provides instructions for disassembling, inspecting, and reassembling the front forks.
Outlines procedures for inspecting and servicing the steering head bearings.
Covers maintenance and adjustments for various control cables and fittings.
Explains the operation, testing, and troubleshooting of the ignition system components.
Details tests and checks for the motorcycle's charging system components.
Covers testing and troubleshooting for all lighting and signal components.
Provides detailed technical specifications for the motorcycle's various systems.
Illustrates the correct routing for all electrical wires and control cables.
A comprehensive schematic showing all electrical connections and components.
To Next Page
