Need help?Do you have a question about the Yamaha QT50 and is the answer not in the manual?
General| Transmission | Automatic |
|---|---|
| Bore x Stroke | 40.0 mm x 39.2 mm |
| Compression Ratio | 6.5:1 |
| Fuel System | Carburetor |
| Ignition | CDI |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brake | Drum |
| Rear Brake | Drum |
| Front Tire | 2.25-14 |
| Rear Tire | 2.25-14 |
| Starting System | Kick start |
| Final Drive | Chain |
| Wheelbase | 44.1 inches |
| Engine Type | 49cc, Air-cooled, 2-stroke, single |
| Fuel Capacity | 1.3 gallons (4.9 liters) |
| Weight | 50 kg (approx.) |
| Top Speed | 30 mph (48 km/h) |
| Length | 66.9 inches (1700 mm) |
Location and identification of the frame serial number on the steering head pipe.
Location and identification of the engine serial number on the crankcase.
Check for sufficient fuel in the tank before operation.
Ensure adequate oil level in the oil tank for engine lubrication.
Verify brake lever play and proper operation of front and rear brakes.
Inspect tire pressure, tread condition, and rim for damage.
Procedure for starting the engine from cold, including fuel and ignition settings.
Techniques for applying brakes smoothly and safely, avoiding skids.
Safe methods for approaching and navigating corners, especially on wet surfaces.
Steps to safely stop the bike, including using brakes and turning off the engine.
Braking performance data under various load and brake system conditions.
Information on passing times and distances at different speeds.
Explanation of wire color codes used in the vehicle's wiring diagram.
To Next Page
