To Next PageTo Next Page
Need help?Do you have a question about the Yamaha RAPTOR 700R 2022 and is the answer not in the manual?
Overview of the owner's manual and its purpose.
Key safety guidelines and precautions for ATV operation.
Explanation of special notations and symbols used in the manual.
Specifies the ATV is for off-road use only and prohibits road operation.
Instructions for recording VIN, model, and key identification numbers.
Diagrams showing the placement of various warning and specification labels on the ATV.
Details on compliance certification and age restriction warning labels.
General warnings about unsafe ATV operation practices.
Prohibits carrying passengers due to balance and control risks.
Discusses hazards of improper tire pressure and overloading.
Caution regarding high-pressure nitrogen gas in shock absorbers.
General ATV safety advice, collision risks, and operating precautions.
Emphasis on proper training and age recommendations for riders.
Guidelines for riding on various terrains, hills, and during turns.
Advice on riding in water, darkness, and general maintenance awareness.
Steps to take and safety measures following an ATV accident.
Procedures for handling vehicle breakdowns safely.
Warnings about potential safety hazards from aftermarket parts and modifications.
Advice and cautions for mounting accessories onto the ATV.
Information on carbon monoxide risks and how to avoid poisoning.
Identification of major components visible from the left side of the ATV.
Identification of major components visible from the right side of the ATV.
Identification and description of controls located on the handlebars.
Explanation of the main switch positions and their functions.
Description of various indicator and warning lights on the instrument panel.
Information on the engine trouble warning light and self-diagnostic device.
Explanation of the functions of the handlebar switches.
Operation details for engine stop, start, and lighting switches.
Instructions on how to use and check the throttle lever.
Guidance on adjusting the speed limiter for performance control.
Explanation of clutch lever function and its relation to the ignition system.
Instructions for adjusting the front brake lever position.
How to apply the rear brake using the brake pedal.
Instructions for applying and releasing the parking brake.
Description of the shift pedal's role in gear changes.
Reinforces the importance of releasing the parking brake before riding.
Explanation of how to use the reverse knob for shifting into reverse.
Instructions for using the fuel tank cap and safety during refueling.
Detailed steps for refueling and associated safety precautions.
Guidance on checking the fuel level in the tank.
Information on recommended gasoline grades and ethanol content.
Step-by-step instructions for removing the ATV seat.
Instructions for correctly installing the ATV seat.
Guidance on adjusting the spring preload on front shock absorbers.
Detailed steps and tips for adjusting front spring preload.
Explanation of how to adjust rebound and compression damping on front shocks.
Detailed steps for adjusting spring preload on front shock absorbers.
Guidance on adjusting the rebound damping force of front shock absorbers.
Instructions for adjusting the fast compression damping force.
Instructions for adjusting the slow compression damping force.
Detailed steps for adjusting spring preload on rear shock absorbers.
Guidance on adjusting the rebound damping force of rear shock absorbers.
Instructions for adjusting compression damping force on rear shock absorbers.
Specific values and measurements for rear spring preload adjustment.
Details on adjusting rebound damping force for rear shock absorbers.
Instructions for adjusting fast compression damping for rear shock absorbers.
Instructions for adjusting slow compression damping for rear shock absorbers.
Procedures for checking fuel and engine oil levels before operation.
Instructions for checking the coolant level in the reservoir.
Checks for front and rear brake operation, fluid, and leaks.
Ensuring smooth operation and correct free play of clutch and throttle.
Checking drive chain slack, wheel condition, and tire pressure.
Verifying operation of shift pedal, instruments, lights, and switches.
Ensuring correct fuel and engine oil levels are maintained.
Procedures for checking brake fluid levels and looking for leaks.
Testing brake performance and checking brake pad wear.
Verifying throttle operation, drive chain condition, and tire wear.
Guidance on checking tire pressure and tread depth for safety.
Ensuring chassis fasteners are tight and instruments function correctly.
Step-by-step instructions for starting the ATV engine safely.
Detailed explanation of the ATV's shifting procedures.
Guidance on how to begin riding and accelerate smoothly.
Techniques for slowing down and downshifting safely.
Instructions and safety precautions for operating the ATV in reverse.
Guidelines for the engine's initial break-in period for longevity.
Standard procedures for parking the ATV securely.
Specific safety advice for parking the ATV on slopes.
Information on choosing and using genuine Yamaha accessories.
Warnings regarding the use of aftermarket parts and modifications.
Advice on properly mounting accessories to maintain ATV handling.
Specifies the maximum allowable weight for rider, cargo, and accessories.
Guidelines for properly distributing and securing cargo for safe handling.
Introduction to basic ATV riding and familiarization.
Emphasis on familiarizing oneself with ATV controls and operation.
Importance of proper instruction, judgment, and skill development.
Specific warning against operation by children under 16 years of age.
Clarifies the ATV is designed for one operator only; passengers prohibited.
List of essential protective clothing and gear for safe ATV riding.
Warning against operating the ATV under the influence of alcohol or drugs.
Emphasizes the critical need for pre-operation checks for safety.
How to adjust the speed limiter for performance control.
Guidance on managing loads to maintain ATV stability and handling.
Advice on maintaining proper rider posture during operation.
Cautions against improper modifications affecting ATV performance and safety.
Warnings about hot exhaust components and combustible materials.
Reiteration that the ATV is designed exclusively for off-road use.
Importance of understanding and reacting to terrain conditions.
Precautions and techniques for riding on challenging terrain surfaces.
Advice on being visible and respecting riding area restrictions.
Recommendation to practice basic maneuvers in a safe, open area.
Detailed instructions on how to execute safe turns on the ATV.
Emphasis on practicing turning techniques at low speeds.
Safety guidelines and techniques for climbing hills.
Advice for navigating hill crests and handling stalled climbs.
Instructions on how to handle rolling backward while climbing a hill.
Safety guidelines and techniques for riding downhill.
Proper body positioning and steering for traversing slopes.
Safe procedures for crossing shallow water.
Advice on post-water riding care and cleaning the air filter case.
Techniques for safely riding over obstacles on rough terrain.
How to safely control skidding and sliding on various surfaces.
Guidance on addressing common riding problems like turning or tipping.
Explains the benefits of regular inspection, adjustment, and lubrication.
Details on where to store the owner's manual and tool kit.
Maintenance schedule for the emission control system components.
Maintenance tasks for exhaust and air induction systems.
Procedures for cleaning air filter and maintaining brakes.
Maintenance checks for brake fluid, parking brake, wheels, and tires.
Lubrication and checks for suspension pivots and drive chain.
Inspection of chassis fasteners and shock absorber operation.
Maintenance for engine mounts, engine oil, and oil filter element.
Checks for coolant level, leaks, and lubrication of control cables.
Verifying operation of levers and switches.
Information on checking brake fluid, replacing components, and service intervals.
Steps for removing and reinstalling the ATV's body panels.
Guidance on how to inspect the spark plug for condition and deposits.
Detailed procedures for removing, checking, and replacing the spark plug.
Instructions for installing the spark plug and setting the gap.
Procedures for checking engine oil and oil filter element.
Step-by-step guide for accurately checking the engine oil level.
Detailed steps for draining old oil and replacing it.
Instructions for removing the oil filter element and O-rings.
Steps for reinstalling the oil filter cover and related components.
Guidance on adding the correct amount of new engine oil.
Details on recommended engine oil grade and quantity.
Information on the advantages and development of Yamalube oils.
Procedures for checking the coolant level in the reservoir and radiator.
Instructions for adding coolant to the reservoir and radiator.
Step-by-step guide for draining and refilling the cooling system.
Procedure for flushing the cooling system and adding new coolant.
Instructions for cleaning the air filter element.
Steps for removing the air filter case cover to access the element.
Instructions for washing the air filter sponge material with solvent.
Applying filter oil to the sponge and reassembling the air filter.
Final steps for installing the air filter element and case cover.
Instructions for cleaning carbon deposits from the spark arrester.
Steps for removing the tailpipe cover.
Cleaning carbon deposits from the spark arrester portion of the tailpipe.
How to check and adjust the engine's idling speed.
Procedures for checking and adjusting throttle lever free play.
Information regarding valve clearance and its adjustment by a dealer.
Notes on checking and adjusting the reverse lock release cable.
Warning about potential loss of braking ability from improper brake service.
How to check front and rear brake pad wear using indicator grooves.
Guidance on checking the brake fluid level in the reservoir.
Checking the brake fluid level for the front brake system.
Checking the brake fluid level for the rear brake system.
Steps to access the rear brake fluid reservoir and specified fluid type.
Precautions for brake fluid service, including contamination and type.
Information on when to change brake fluid, seals, and hoses.
Checking for and adjusting free play in the front brake lever.
Checking and adjusting the height of the brake pedal.
Procedure for checking and adjusting parking brake free play.
How to adjust the rear brake light switch for timing.
Instructions for checking and adjusting clutch lever free play.
How to check the drive chain slack before each ride.
Step-by-step procedure for adjusting drive chain slack.
Instructions for cleaning and lubricating the drive chain.
Checking and lubricating control cables for smooth operation.
Lubricating the pivot points of brake and clutch levers.
Checking the operation of the shift pedal for smoothness.
Lubricating the pivot points of the brake pedal.
Checking wheel hub bearings for play or smooth rotation.
Instructions for lubricating the swingarm pivots.
Lubricating rear suspension relay arm and connecting arm pivots.
Lubricating the upper and lower arm pivots.
Instructions for lubricating the steering shaft.
General advice on battery care, terminal cleaning, and recharging.
Step-by-step guide for safely removing the ATV battery.
Proper methods for charging the ATV battery.
Advice on storing the battery to maintain its charge and health.
Instructions for correctly installing the battery and connecting leads.
Step-by-step guide for replacing a blown fuse safely.
Detailed instructions for checking and replacing fuses.
List of fuse types and their amperage ratings for the ATV.
Detailed instructions for replacing a burnt-out headlight bulb.
Instructions for installing a new headlight bulb and socket.
How to adjust the headlight beam for proper illumination.
Checking the functionality of the LED brake/tail light.
Steps for removing and installing the ATV's wheels.
General guidance on diagnosing and resolving ATV operational problems.
Safety warning regarding checking the fuel system, especially regarding fire hazards.
Diagnostic charts for common starting issues and poor engine performance.
Steps to diagnose and address engine overheating issues.
Detailed steps for cleaning the ATV, including warnings about water pressure.
Advice for storing the ATV for short periods, emphasizing dry conditions.
Comprehensive guidelines for storing the ATV for several months.
Key physical dimensions and weight specifications for the ATV.
Details about the ATV's engine, including displacement and cycle.
Recommended engine oil grades and coolant quantities.
Details on recommended fuel, tank capacity, and drivetrain gear ratios.
Information on tire sizes and brake types.
Specifications for suspension type and electrical system voltage.
Explanation of the vehicle emission control information label.
Details on California's emission control standards and violations.
Federal laws prohibiting tampering with noise control systems.
A chart for recording scheduled maintenance intervals and services performed.
Details of the limited warranty coverage for Yamaha ATVs.
Owner's responsibilities for maintaining warranty coverage.
Q&A addressing customer costs, responsibilities, and dealer roles.
Information on where to take the ATV for warranty service.
How to contact Yamaha Motor Corporation for additional support.
Details on the benefits and coverage provided by Yamaha Extended Service.
Information regarding Y.E.S. coverage scope and transferability.
Information on purchasing Y.E.S. and how to contact Yamaha for coverage.
General| Engine Type | 686cc liquid-cooled SOHC 4-stroke; 4 valves |
|---|---|
| Bore x Stroke | 102.0mm x 84.0mm |
| Compression Ratio | 10.0:1 |
| Ignition | TCI: Transistor Controlled Ignition |
| Front Brakes | Dual hydraulic disc |
| Rear Brakes | Hydraulic disc |
| Front Tires | AT21 x 7-10 |
| Rear Tires | AT20 x 10-9 |
| Seat Height | 32.7 in |
| Wheelbase | 50.4 in |
| Fuel System | Fuel Injection |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Independent double wishbone, 9.1 inches of travel |
| Rear Suspension | 10.1 inches of travel |
