To Next PageTo Next Page
Need help?Do you have a question about the Yamaha RX-A3030 and is the answer not in the manual?
General| Receiver type | - |
|---|---|
| Pre-out connectivity | Yes |
| Audio output channels | 9.2 channels |
| Dynamic power per channel (4 Ohm) | 295 W |
| Dynamic power per channel (8 Ohm) | 175 W |
| Power output per channel (1KHz@8 Ohm) | 230 W |
| Power output per channel (20-20KHz@8 Ohm) | 150 W |
| HDMI in | 8 |
| Audio (L/R) in | 10 |
| Remote (IR) input | 2 |
| Composite video in | 5 |
| Digital audio coaxial in | 3 |
| Ethernet LAN (RJ-45) ports | 1 |
| Component video (YPbPr/YCbCr) in | 4 |
| Headphone connectivity | 6.3 mm |
| Digital audio coaxial out | 0 |
| AM band range | 522 - 1.620 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Optical drive included | No |
| Display | LED |
| Product color | Black |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.35 W |
Weight and Dimensions| Depth | 467 mm |
|---|---|
| Width | 435 mm |
| Height | 192 mm |
| Weight | 19900 g |
Lists supplied accessories for the AV receiver and its setup.
Lists necessary cables not supplied with the AV receiver.
Illustrates the recommended placement of speakers for a 9.1-channel system.
Guides connecting front (FL, FR) and center (C) speakers to the unit.
Guides connecting surround (SL, SR) speakers to the unit's SURROUND terminals.
Guides connecting surround back (SBL, SBR) speakers to SURROUND BACK terminals.
Guides connecting front presence (FPL, FPR) speakers to EXTRA SP 1 terminals.
Guides connecting the subwoofer to the SUBWOOFER PREOUT jack.
Connects external devices like BD/DVD players and TVs using HDMI and optical cables.
Instructions for powering on the unit and selecting the correct TV input.
Connects the YPAO microphone to the unit's front panel for automatic speaker setup.
Initiates the YPAO measurement process using the remote control.
Saves the measured speaker settings or cancels the process.
Final step to complete speaker setting optimization.
Selects "AV 1" as the input source for playback.
Starts BD/DVD playback and selects the "STRAIGHT" sound mode.
Adjusts the main volume level for playback.
