PERIODIC MAINTENANCE AND MINOR REPAIR
6-3
6
10
*
Wheels
• Check runout, spoke tightness and for damage.
• Tighten spokes if necessary.
√√√√
11
*
Tires
• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√√√√
12
*
Wheel bearings • Check bearing for looseness or damage. √√√√
13
*
Swingarm • Check operation and for excessive play. √√√√
14 Drive chain
• Check chain slack.
• Make sure that the rear wheel is properly aligned.
• Clean and lubricate.
Every 1,000 km and after washing
the motorcycle or riding in the rain.
15
*
Steering bearings
• Check bearing play and steering for roughness. √√√√√
• Lubricate with lithium-soap-based grease. Every 24,000 km
16
*
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened. √√√√ √
17 Sidestand, centerstand
• Check operation.
• Lubricate.
√√√√ √
18
*
Sidestand switch • Check operation. √√√√√ √
19
*
Front fork • Check operation and for oil leakage. √√√√
20
*
Shock absorber
assemblies
• Check operation and shock absorbers for oil leakage. √√√√
21
*
Carburetor
• Check starter (choke) operation.
• Adjust engine idling speed.
√√√√√ √
22 Engine oil • Change. √√√√√ √
23 Engine oil filter element •Clean. √√√
24
*
Front and rear brake
switches
• Check operation. √√√√√ √
25 Moving parts and cables • Lubricate. √√√√ √
NO. ITEM CHECK OR MAINTENANCE JOB
ODOMETER READING (× 1,000 km)
ANNUAL
CHECK
1 6 12 18 24
E_3mw.book Page 3 Monday, February 5, 2001 9:54 AM
To Next Page
