EasyManua.ls Logo

Yamaha TX650 User Manual

Yamaha TX650
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Yamaha TX650 and is the answer not in the manual?

Yamaha TX650 Specifications

General IconGeneral
BrandYamaha
ModelTX650
CategoryMotorcycle
LanguageEnglish

Summary

Features of TX650 Engine

Control Function

Basic Instruction

Operation

Pre-Ride Checks

Lists essential checks before riding: fuel, oil, tire pressure, brakes, lights, and horn.

Starting the Engine

Guides on starting in cold weather, with a warm engine, and warming up the engine.

Shifting and Acceleration

Explains how to use the 5-speed transmission for shifting, acceleration, and optimal engine RPM.

Stopping the Motorcycle

Details methods for stopping, including engine compression, front/rear brakes, and caution in wet conditions.

Engine Break-in Procedure

Emphasizes the critical 0-500 mile period, advising against excessive load and heat.

Break-in: 0-200 Miles

Advises avoiding operation above 3,500 rpm and varying speed.

Break-in: 200-400 Miles

Recommends avoiding prolonged operation above 4,000 rpm and not using full throttle.

Break-in: 400-600 Miles

Suggests avoiding prolonged full throttle and cruising speeds over 5,000 rpm.

Break-in: 600+ Miles

Advises avoiding prolonged full throttle and cruising speeds over 6,000 rpm, varying speed.

Lubrication and Maintenance Chart

Servicing

Clutch Adjustment

Explains the two adjustment points for clutch free play at the lever and engine.

Front Brake Adjustment

Guides on adjusting the front brake lever free play (13-26mm) for proper engagement.

Rear Brake Adjustment

Explains adjusting rear brake pedal free play (approx. 1.0 in.) and checking the stoplight switch.

Drive Chain Maintenance

Covers drive chain lubrication, cleaning, and adjustment for proper free play (20mm).

Carburetor Adjustments

Covers basic carburetor adjustments: idle mixture and idle speed.

Idle Mixture Setting

Provides instructions for setting the idle mixture screw (1½ turns out from seated).

Idle Speed Adjustment

Guides on adjusting the idle speed screw to achieve 900-1,000 rpm.

Throttle Cable Slack Adjustment

Details adjusting throttle cable slack at the carburetor and throttle grip for proper operation.

Air Filter Cleaning

Instructs on cleaning the air filter element, especially if riding on dirt roads.

Engine Oil Level Check and Replacement

Details checking and filling engine oil, plus transmission oil change intervals and procedure.

Warranty Information

Troubleshooting

Related product manuals