What to do if I find a large amount of metal particles in the final gear oil of my Yamaha VMAX 2009?
If you find a large amount of metal particles in the final gear oil of your Yamaha Motorcycle, check for bearing seizure.
General| Displacement | 1679cc |
|---|---|
| Bore x Stroke | 90.0 mm x 66.0 mm |
| Compression Ratio | 11.3:1 |
| Fuel System | Fuel Injection |
| Ignition | TCI |
| Transmission | 5-speed |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Engine Type | Liquid-cooled, 4-stroke, DOHC, 4-valve, V4 |
| Rear Suspension | Swingarm (Link suspension) |
| Front Brakes | Dual hydraulic disc |
| Rear Brakes | Single hydraulic disc |
| Front Tire | 120/70 R18 |
| Rear Tire | 200/50 R18 |
| Length | 2395 mm |
| Width | 825 mm |
| Seat Height | 775 mm |
| Wheelbase | 1700 mm |
| Fuel Capacity | 15 liters |
| Wet Weight | 310 kg |
Lists engine type, displacement, bore/stroke, compression ratio, and oil details.
Covers frame type, wheels, tires, brakes, steering, suspension, and chassis.
Provides general and specific torque values for fasteners across various assemblies.
Details periodic checks and adjustments for engine components like oil, coolant, and spark plugs.
Covers periodic checks and adjustments for brakes, steering, suspension, and tires.
Explains removal, disassembly, checking, assembly, and installation of front brake components.
Details removal, disassembly, checking, assembly, and installation of rear brake components.
Covers removal, checking, and installation of camshafts, gears, and timing chain components.
Explains removal, checking, and installation of valves, springs, seats, and guides.
Covers removal, checking, and installation of clutch components like plates and pressure plate.
Details separating, checking, assembling, and installing the crankcase halves.
Covers removal, checking, and installation of connecting rods, pistons, and rings.
Details removal, checking, and installation of crankshaft and balancer components.
Covers removal, checking, cleaning, and adjusting throttle bodies and sensors.
Covers circuit diagram, sidestand operation, and troubleshooting for the ignition system.
Details circuit diagram, ECU self-diagnostics, troubleshooting methods, and fault codes.
Outlines ABS components, circuit diagram, troubleshooting, and operation tests.
Provides a guide for diagnosing and resolving common electrical system issues.
Lists common causes and checks for engine starting problems.
To Next Page