- 5 -
C-1
C-2
C-2
D-2
D-1
Top cover
Sheet C, 2 parts in total
Fold each relevant part according to the assembly symbols.
First, assemble each component by following the
working method and markings. Then, refer to the il-
lustration and photos below to glue the parts together.
Indication of
Working Methods
Fold or Curve
Glue
3 Assembling the Top Cover and Intake
Please use the dots on each component as reference when gluing surfaces.
Reference photo
Fold and glue the parts making sure both tabs (illustrated
by dotted-lines) are neatly tucked in.
Intake
Sheet D, 2 parts in total
Fold each relevant part according to the assembly symbols.
Reference photo
To Next Page
Loading...
