Yamaha WOLVERINE RMAX4 - Page 68

5-36
5
4. Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
Front spring preload setting:
Minimum (soft):
Distance A = 519.3 mm (20.44 in)
Standard:
Distance A = 509.3 mm (20.05 in)
Maximum (hard):
Distance A = 499.3 mm (19.66 in)
Rear spring preload setting:
Minimum (soft):
Distance A = 475.2 mm (18.71 in)
Standard:
Distance A = 460.2 mm (18.12 in)
Maximum (hard):
Distance A = 445.2 mm (17.53 in)
1. Distance A
Tightening torque:
Locknut:
41 N·m (4.1 kgf·m, 30 lb·ft)
1
UB4J11E0.book Page 36 Thursday, July 23, 2020 10:22 AM