Yamaha XLT1200 WaveRunner 2002 User Manual

4-3
E
EJU01195
Lubrication
WARNING
@
Do not spray flammable rust inhibitor
products on engine surfaces while the
engine is hot. The sprayed substance or
propellants could catch fire.
@
1. Remove the spark plugs and pour
approximately one tablespoon of oil into
each cylinder.
2. Grease the spark plug threads and rein-
stall the spark plugs.
3. Crank the engine within 3 seconds using
the start switch.
4. Lubricate all cables such as the throttle,
choke, and steering cables.
N
O
TE:
@
Use a Yamaha Power Cable Luber and
Yamaha Lube-Zall to pressure lubricate the
cables and purge out any moisture between
the inner and outer cables.
@
5. Lubricate the areas of the watercraft speci-
fied under Lubrication points on page 4-16.
UF0V11.book Page 3 Monday, July 9, 2001 2:01 PM

Yamaha XLT1200 WaveRunner 2002 Specifications

General

Manufacturer	Yamaha
Model	XLT1200 WaveRunner
Year	2002
Category	Boat
Displacement	1176cc
Seating Capacity	3 persons
Fuel Type	Gasoline
Hull Material	Fiberglass
Engine Type	2-stroke
Width	4 ft
Storage Capacity	18.5 gallons