Name: Yamaha XLT1200 WaveRunner 2005
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4-22

EJU01702

Replacing the fuse

The fuses are in the electrical box 1.

To replace the fuse:

1. Remove the hose band a and keep the

duct hose b away from the electrical

box.

2. Remove the cap 2 on the electrical box.

3. Remove the fuse using the fuse puller 3.

4. Replace the fuse with one of the correct

amperage.

WARNING

Do not use fuses of higher amperage that

those recommended. Substitution of a

fuse of improper rating can cause exten-

sive electrical system damage and possi-

ble fire.

EJU01112

Bleeding the oil injection

pump

If the oil tank becomes completely empty,

or any hose connected to the oil pump has

been disconnected, the oil pump must be

bled to ensure proper oil flow.

If bleeding of the oil pump is necessary,

have a Yamaha dealer bleed it.

Fuse amperage: 10 A, 20 A

UF0V14.book Page 22 Thursday, July 8, 2004 11:35 AM

Questions and Answers:

Need help?

Do you have a question about the Yamaha XLT1200 WaveRunner 2005 and is the answer not in the manual?

Yamaha XLT1200 WaveRunner 2005 Specifications

General