Need help?Do you have a question about the Yamaha XV19SX(C) and is the answer not in the manual?
General| Transmission | 5-speed |
|---|---|
| Final Drive | Belt |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Displacement | 1, 854cc (113ci) |
| Bore x Stroke | 100 x 118mm |
| Fuel System | Fuel injection |
| Ignition | TCI |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Front Tire | 130/70-18 |
| Overall Length | 2, 460mm (96.9in) |
| Overall Width | 790mm |
| Seat Height | 735mm (28.9in) |
| Wheelbase | 1, 715mm (67.5in) |
| Fuel Capacity | 4.5 gal |
| Wet Weight | 758 lb |
Technical data for engine type, displacement, bore, stroke, fuel, engine oil, and transfer gear oil.
Details on frame type, wheels, tires, brakes, steering, and suspension.
Data on voltage, ignition system, battery, lights, starter motor, and fuses.
Procedures for adjusting valve clearance, throttle bodies, and checking engine-related components.
Procedures for adjusting brakes, steering, suspension, and checking wheels and tires.
Procedures for checking and charging the battery, fuses, relays, and replacing bulbs.
Procedures for removing and disassembling brake calipers and master cylinder.
Procedures for removing and disassembling rear brake components including caliper and master cylinder.
Procedures for removing, disassembling, checking, and assembling front fork legs.
Procedures for removing, checking, and installing the steering head components.
Procedures for removing the muffler, exhaust pipes, ignition coils, and engine.
Procedures for removing, disassembling, checking, and installing camshafts and related parts.
Procedures for removing, checking, and installing cylinder heads and associated components.
Procedures for removing, checking, and installing valves, valve springs, and related components.
Procedures for removing, checking, and installing cylinders, pistons, and piston rings.
Procedures for removing, disassembling, checking, and installing clutch components.
Procedures for separating, disassembling, checking, and assembling the crankcase.
Procedures for removing, disassembling, checking, and assembling the oil pump.
Procedures for removing, checking, and installing the crankshaft and connecting rods.
Procedures for removing, disassembling, checking, and assembling the transmission components.
Procedures for removing, checking, and installing rollover valves, pressure regulator, and throttle bodies.
Circuit diagram, engine stopping conditions, and troubleshooting for the ignition system.
Circuit diagram, operation, and troubleshooting for the electric starting system.
Circuit diagram and troubleshooting for battery charging issues.
Circuit diagram and troubleshooting for lighting system failures.
Circuit diagram and troubleshooting for turn signals, brake lights, and horn.
Circuit diagram, ECU self-diagnostics, and troubleshooting for the fuel injection system.
To Next Page
