PRE-OPERATION CHECKS
4-2
4
NOTE:
Pre-operation checks should be made each time the motorcycle is used. Such an inspection can be thoroughly accom-
plished in a very short time; and the added safety it assures is more than worth the time involved.
WARNING
If any item in the PRE-OPERATION CHECK is not working properly, have it inspected and repaired before operating
the motorcycle.
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Fuel
• Check fuel level.
• Add fuel if necessary.
3-8
–
3-9
Lights, signals and switches • Check proper operation. —
ITEM CHECKS PAGE
E_5KS.book Page 2 Monday, August 21, 2000 10:48 AM
To Next Page
Loading...
