Do you have a question about the Yamaha YFM350S and is the answer not in the manual?
Brand | Yamaha |
---|---|
Model | YFM350S |
Category | Offroad Vehicle |
Language | English |
Critical safety information for operating the ATV.
Notations and information of particular importance within the manual.
Key information regarding the ATV's design and regulations.
Essential safety precautions and guidelines for ATV operation.
Spaces to record key identification numbers for vehicle tracking.
Explanation of the ON and OFF positions of the main switch.
Details on light switch, engine stop switch, and start switch functions.
Instructions on how to use and check the throttle lever for proper function.
Explains the operation of the front brake lever and rear brake pedal.
Instructions on how to apply and release the parking brake.
Check brake lever play, pedal height, and fluid level.
Ensure sufficient gasoline is in the tank before riding.
Procedures for checking and maintaining the engine oil level.
Check tire pressure, wear, and ensure correct tire type.
Step-by-step guide for starting the engine when cold.
Instructions on proper gear shifting procedures for smooth operation.
Guidelines for the critical initial operating hours of the engine.
Safe procedures for parking the ATV on inclined surfaces.
Emphasizes responsible riding and skill development.
Restrictions and warnings for underage ATV operation.
Essential protective gear for safe ATV riding.
Techniques for proper turning to maintain traction and control.
Techniques for safely ascending slopes and hills.
Proper techniques for descending slopes and hills.
Procedures for maintaining balance while traversing inclined surfaces.
Precautions and techniques for navigating uneven or bumpy surfaces.
Techniques for managing and controlling skids and slides.
Recommended intervals for inspection, adjustment, and lubrication.
Procedures for checking, changing, and cleaning engine oil and filter.
Steps for removing, inspecting, and installing the spark plug.
How to check front brake pad wear using indicator grooves.
Procedures for checking and maintaining the brake fluid level.
Steps for adjusting the parking brake cable length.
How to check and adjust the drive chain slack.
Procedures for removing and installing the ATV wheels.
Steps for locating and replacing a blown fuse.
Guidance on diagnosing and resolving common operational problems.
Proper methods for cleaning the ATV to maintain performance and appearance.
Steps for preparing the ATV for long-term storage.
Key technical details of the ATV's engine.
Information on fuel type, tank capacity, and carburetor specifications.
Details on transmission type, gear ratios, and chassis construction.
Table for converting metric units to imperial units used in the manual.