Yamaha yz450f 2007 User Manual

5 - 41
CHAS
33. Install:
• Protector guide 1
N
OTE:
Install the protector guide with its wider side a
facing downward.
Installation
1. Install:
• Front fork 1
N
OTE:
• Temporarily tighten the pinch bolts (under
bracket).
• Do not tighten the pinch bolts (handle crown)
yet.
2. Tighten:
• Damper assembly 1
N
OTE:
Use the cap bolt ring wrench 2 to tighten the
damper assembly with specified torque.
Cap bolt ring wrench:
YM-01501/90890-01501
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
3. Adjust:
• Front fork top end a
Front fork top end (standard) a:
Zero mm (Zero in)
FRONT FORK

Yamaha yz450f 2007 Specifications

General

Engine Type	449cc liquid-cooled DOHC 4-stroke; 5 titanium valves
Bore x Stroke	95.0mm x 63.4mm
Compression Ratio	12.5:1
Ignition	CDI
Transmission	5-speed
Final Drive	Chain
Front Tire	80/100-21
Rear Tire	120/80-19
Seat Height	39.1 in
Fuel Capacity	1.8 gal
Dry Weight	220 lb
Front Brake	Hydraulic single disc, 250mm
Rear Brake	Hydraulic single disc, 245mm
Overall Width	32.5 in
Overall Height	51.2 in