Need help?Do you have a question about the Yamaha YZ450F(T) and is the answer not in the manual?
General| Bore x Stroke | 97.0mm x 60.8mm |
|---|---|
| Transmission | 5-speed |
| Final Drive | Chain |
| Fuel Capacity | 1.6 gal |
| Wheelbase | 58.5 in |
| Length | 86.0 in |
| Width | 32.5 in |
| Curb Weight | 245 lb |
| Fuel Delivery | Fuel injection |
| Ignition | TCI |
| Front Brake | Hydraulic disc, 270mm |
| Front Tire | 80/100-21 |
| Rear Tire | 120/80-19 |
| Engine Type | Liquid-cooled, DOHC, 4-stroke, single-cylinder |
| Front Suspension | KYB® Speed-Sensitive System inverted fork; fully adjustable, 12.2-in travel |
Explains the meaning of safety symbols like WARNING, CAUTION, and NOTE for user guidance.
Details how to find chapters and items using the table of contents and fore edge symbols.
Explains exploded diagrams, numbering, symbols, and job instruction charts for clarity.
Chapter 1 covering general information about the motorcycle.
Chapter 2 detailing technical specifications of the motorcycle.
Chapter 3 outlining maintenance intervals and checks.
Chapter 4 covering engine-related procedures.
Chapter 5 detailing chassis components and maintenance.
Chapter 6 covering the electrical system.
Chapter 7 providing information on engine and chassis tuning.
Covers general information about the motorcycle, including description and important notices.
Details technical specifications such as dimensions, engine data, and weights.
Outlines maintenance intervals, pre-operation checks, and adjustments for various systems.
Details the removal and installation of the seat, fuel tank, and side covers.
Covers removal and installation of the radiator.
Details the removal and installation of the carburetor.
Explains the removal and installation of the camshafts.
Covers removal and installation of the cylinder head.
Details the removal and installation of valves and valve springs.
Covers removal and installation of the cylinder and piston.
Details the removal and installation of the clutch.
Covers removal and installation of these components.
Details the removal and installation of the balancer.
Covers removal and installation of the oil pump.
Details the removal and installation of these parts.
Covers removal and installation of the CDI magneto.
Provides instructions for removing the engine from the chassis.
Covers the separation and removal of these components.
Details the removal and installation of these transmission components.
Shows electrical components and their wiring connections.
Explains the map-controlled CDI unit and its function.
Details the ignition system components and operation.
Describes the TPS system and its function.
Covers engine tuning procedures.
Details chassis tuning procedures.
To Next Page
