What to do if Yamaha Z200PETO Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha Z200PETO Outboard Motor boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
General| Engine Type | 2-Stroke |
|---|---|
| Horsepower | 200 hp |
| Fuel Type | Gasoline |
| Starting System | Electric |
| Cooling System | Water-cooled |
| Gear Ratio | 1.86:1 |
| Max Power | 200 hp |
| Shaft Length | 20 inches |
| Displacement | 2.6L (2596cc) |
Step-by-step guide for safely uncrating the outboard motor from its steel frame packaging.
Details on correctly mounting the outboard motor onto the boat transom, including dimension guidelines.
Instructions for installing the remote oil tank, required for oil injection engines.
Details propeller specifications, including types, identification, and selection criteria.
Describes different Yamaha propeller types like Standard, Reliance, Saltwater Series, VMAX, Performance, High Performance.
Guidance on selecting the appropriate propeller pitch for different operating loads and conditions.
Details various remote control applications including 701, 703, 704, 6X3, 6X5, 6X6, and 6X7 models.
Information on selecting, applying, routing, and adjusting remote control cables for proper operation.
Details the 6X4 multi-function tiller handle, its electrical functions, and kit contents for various models.
Procedures for mounting gauges, including location selection, fitting plate installation, and wiring.
Details analog tachometer applications, dimensions, and pole number setup for engine RPM monitoring.
Describes digital tachometer applications, dimensions, and pole number setup for engine RPM monitoring.
Covers speedometer applications, dimensions, tube routing, and digital setup for boat speed measurement.
Provides fuel management gauge applications, dimensions, sender installation, and wiring.
Explains the initial setup process for digital network gauges, including engine number recognition.
Provides a table of common system and gauge troubles, their causes, measures, and notes.
Lists suitable battery types and minimum ratings based on global and US/Canada models and capacity.
Explains battery wiring for isolator-equipped models and twin-battery setups, including safety precautions.
To Next Page
