The DIGITRONIK® is a registered trademark of Yamatake Corporation.
Windows
®, Windows NT® and Microsoft® are registered trademark of
Microsoft Co.,Ltd.
Other company names and product names listed in this manual are registered
trademark or trademark of respective companies.
1994 Yamatake Corporation ALL RIGHTS RESERVED
This product has been designed, developed and manufactured for general-purpose
application in machinery and equipment.
Accordingly, when used in applications outlined below, special care should be taken to
implement a fail-safe and/or redundant design concept as well as a periodic
maintenance program.
• Safety devices for plant worker protection
• Start/stop control devices for transportation and material handling machines
• Aeronautical/aerospace machines
• Control devices for nuclear reactors
Never use this product in applications where human safety may be put at risk.
RESTRICTIONS ON USE
REQUEST
Ensure that this User's Manual is handed over to the user before the
product is used.
Copying or duplicating this User's Manual in part or in whole is forbid-
den. The information and specifications in this User's Manual are sub-
ject to change without notice.
Considerable effort has been made to ensure that this User's Manual is
free from inaccuracies and omissions.
If you should find any inaccuracies or omissions, please contact
Yamatake Corporation.
In no event is Yamatake Corporation liable to anyone for any indirect,
special or consequential damages as a result of using this product.
To Next Page
Loading...