To Next Page
N
Nicholas HarrisonSep 13, 2025
What to do when the HGC overhaul time is exceeded on Yamatake Laboratory Equipment?
- LLarry ChambersSep 13, 2025
It is recommended to overhaul the analyzer valve unit.
What to do when the HGC overhaul time is exceeded on Yamatake Laboratory Equipment?
It is recommended to overhaul the analyzer valve unit.
General| Brand | Yamatake |
|---|---|
| Model | HGC303 |
| Category | Laboratory Equipment |
| Language | English |
Explains the meaning of warning and caution symbols used in the manual.
Details certifications for hazardous locations (ATEX, FM, TestSafe).
Covers installation procedures and requirements for ATEX flameproof apparatus.
Outlines installation guidelines for FM explosionproof and flameproof apparatus.
Specifies wiring methods for various hazardous location classes (Division 1/2, Class I/II/III).
Defines key terms like HGC303, HGM, HFA100, and lists system components.
Provides a general description of the HGC303 and required system components.
Illustrates the HGC303 measuring system diagram and its main parts.
Explains the FOUNDATION™ fieldbus technology used for data transfer.
Instructions for unpacking the instrument and proper storage guidelines.
Guides on selecting and installing HFA100 or NI Fieldbus-PC Interface.
Step-by-step instructions for installing the HGM software.
Details Fieldbus cable requirements, terminators, and wiring practices.
Covers installation site selection, dimensions, examples, and piping.
Provides terminal connections and wiring diagrams for the HGC303.
Procedures for initial startup, setting pressures, and performing leak tests.
Introduces HGM functions and guides on initial setup and configuration.
Explains how to save, load, and edit measurement data files.
Describes user mode displays, trend graphs, and chromatograms.
Details creating and viewing reports.
Details various configuration options for HGC303 and HGM.
Covers calibration requirements, manual, and auto calibration methods.
Covers calibration functions, data tables, and reports.
Guides for operating the system in GPA mode, including setup and configuration.
Covers saving, editing, and monitoring data specific to GPA mode.
Details generating and viewing reports in GPA mode.
Procedures for checking and changing carrier gas and filters.
Guidelines for the periodic overhaul of the HGC303 analyzer part.
Lists self-diagnostic functions, error messages, and corrective actions.
Explains GPA calculation and different normalization methods.
Provides formulas for various heat value and property calculations.
Lists physical constants and diagram numbers for replacement parts.
Details ISO calculation procedures and normalization methods.
Includes detailed technical drawings and dimensions of the unit.