To Next PageTo Next Page
Need help?Do you have a question about the Yamato SM300 and is the answer not in the manual?
General| Brand | Yamato |
|---|---|
| Model | SM300 |
| Category | Steriliser |
| Language | English |
Describes warning and caution symbols used in the manual.
Explains the meaning of graphical symbols used throughout the manual.
Lists important safety guidelines and warnings for operating the sterilizer.
Lists materials not recommended for use in the sterilizer due to safety risks.
Identifies the external components and their locations on the sterilizer.
Identifies the internal components and their locations within the sterilizer.
Details the control panel layout, buttons, and display functions.
Specifies required environmental conditions for safe and proper installation.
Details electrical grounding and power source specifications for the unit.
Outlines essential initial setup steps before first use.
Describes safe procedures for opening the sterilizer lid, emphasizing pressure checks.
Details the process and precautions for draining hot water after operation.
Explains how to monitor and manage the water bottle level during operation.
Alerts users to hot areas, including the lid gasket, during and after operation.
Explains the function of the panel guard and the effect of the ENTER key.
Guides on operating the sterilize process with waste bags and provides sample data.
Explains how to use the MODE key for navigating and setting parameters.
Lists and defines symbols shown on the sterilizer display for clarity.
Provides a visual flowchart for setting sterilization and drying parameters.
Details the process for setting sterilization temperature and time.
Details the process for setting drying temperature and time.
Covers additional program features such as buzzer settings.
Explains how to choose between Sterilize and Sterilize & Dry modes.
Details the step-by-step process for the Sterilize operation.
Details the step-by-step process for the Sterilize & Dry operation.
Explains how to check set temperature and time during operation.
Describes how to pause or stop an ongoing program.
Explains how to safely use the pressure relief switch.
Details how to check chamber temperature in standby mode.
Explains the unit's self-diagnostic capabilities and error indicators.
Lists error codes and their meanings for troubleshooting.
Provides guidance on actions to take during or after a power interruption.
Offers a chart to diagnose and resolve common operational issues.
Illustrates the electrical connections for SM200 and SM300 models.
Illustrates electrical connections for SM310/510 and defines diagram symbols.
Shows the layout of pipes and connections within the sterilizer.
Provides general safety and cleaning guidelines for performing maintenance.
Details daily and weekly cleaning procedures for the sterilizer's components.
Explains the procedure for cleaning the silencer on a monthly basis.
Provides necessary information and contact details for requesting repair service.
Outlines the terms and conditions of the product warranty.
States the policy regarding contaminated items returned for repair or credit.
Lists common replacement parts applicable to all SM series models.
States the manufacturer's responsibility regarding document updates and product usage.
