EasyManua.ls Logo

Yamato SM310 User Manual

Yamato SM310
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
High Pressure Steam Sterilizer
SM200 SM300
SM310 SM510
Second Edition
Thank you for your Yamato Scientific RE series Rotary Evaporator purchase
For best test data, we recommend you purchase our BM series Water Bath.
Please call Yamato Scientific for more details.
Yamato Scientific America Inc.
Santa Clara, CA
(800) 292-6286
Read and apprehend the important warnings in
this instruction manual prior to use.
Question and Answer IconNeed help?

Do you have a question about the Yamato SM310 and is the answer not in the manual?

Yamato SM310 Specifications

General IconGeneral
BrandYamato
ModelSM310
CategorySteriliser
LanguageEnglish

Summary

Product Specifications

SM200/300 Model Specifications

Technical specifications for the SM200 and SM300 models.

SM310/510 Model Specifications

Technical specifications for the SM310 and SM510 models.

Safety Guidelines

Understanding Safety Symbols

Explanation of warning and caution symbols used in the manual.

General Safety Precautions

General safety guidelines and warnings to prevent hazards during operation.

Prohibited Hazardous Materials

Lists materials that are not recommended for use with the sterilizer due to safety risks.

Installation Procedures

Installation Environmental Requirements

Guidelines for selecting a suitable installation location and environmental conditions.

Power Source and Grounding

Instructions for proper grounding and connecting to an adequate power source.

Initial Setup Procedures

Steps for initial setup, including filter, bottom plate, and drain valve installation.

Operational Guidelines

Safe Lid Opening and Drainage

Safe procedures for opening the lid and draining hot water after operation.

Hot Surfaces and Lid Gasket Warning

Warnings about hot areas and maintaining the lid gasket for proper steam seal.

Program Mode Configuration

MODE Key and Parameter Settings

How to use the MODE key to set sterilization and drying parameters.

Setting Sterilization Temperature and Time

Detailed steps for setting sterilization temperature and time.

Run Menu Operations

Troubleshooting and Error Resolution

Safety, Self-Diagnosis, and Alarms

Safety notes and overview of the self-diagnostic circuitry for malfunction monitoring.

Error Codes and Power Failure Handling

List of error codes and procedures for handling power interruptions.

Related product manuals